Title |
Publisher |
Price |
This set of 3D-printable STL models includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other... [click here for more] |
Fat Dragon Games |
$2.00
|
This set includes three sizes of clip-on walls (plus two reversed from side to side). With these five models, you can clip walls to the outside of any Fat Dragon Games dungeon floor tiles (including corners and intersections), allowing you to use the full floor space. For instance, you can create a corridor a full tile wide (2" wide), a room with exactly 4" or 6" of floor space, or other similar... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 22 3D-printable STL models extends the Fat Dragon Games Cavern Expansion 1 (legacy models) with additional water tiles.
These tiles are based on the original FDG style of caverns.
If you'd like Wet Caverns based on the current/revised FDG style of caverns, see Wet Caverns 2.
Both styles look great, just pick the one that best fits the rest of your cavern prints!
Wet... [click here for more] |
Fat Dragon Games |
$12.99
|
This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set. The three main styles of included pieces are:
Tower walls on a full 4x4 dungeon floor, for a map that includes large curved walls or a tower within a greater dungeon (such as the Sunless Citadel and Cragmaw Castle)
Tower walls with dungeon floors in the inside and village sidewalk on the... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure.
(If you want the same models with wavy water... [click here for more] |
Fat Dragon Games |
$14.99
|
Need a balcony for your BBEG to monologue from? Does Count Strahd need a place to greet his future victims? Or does your castle need a grand entrance? This set of 3D-printable STL models provides the stairs, railings, and balconies you need to build all these and more.
Among the 33 pieces in this set, you'll find:
Balcony floors, walls with balcony floors, and corners with balcony floors,... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D printable terrain was born of my frustration mapping the chasm in the middle of the Redbrand Hideout map. One way or another the map ended up with unsatisfactory gaps between the upper and lower level. With the release of the Natural Bridges set, it seemed like the time to take another look at models for proper chasms, to put those bridges to good use.
The 8 STL models in this set... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D printable models was inspired by the Kobold section of the Sunless Citadel adventure. The 25 included STLs include a doorway for a large curved room, add-on room with skeletons, alcoves with knights and orbs, dragon column and statue, a metal keg piped into the wall, multiple fire pits, a cage whose occupant busted out, a makeshift throne arranged out of nearby rubble, and more!
Several... [click here for more] |
Fat Dragon Games |
$12.99
|
Fat Dragon Games recently updated their line of cavern tiles, including redesigning the cavern floors-with-water in their Cavern Expansion 1 set. However, all the water areas are now completely flat. That’s fine if you intend to add your own water effects after the fact, but if you’d prefer to include the water texture in your prints, there was not an option to take advantage of the redesigned... [click here for more] |
Fat Dragon Games |
$5.99
|
Enjoy this free FDG Dragon Logo wall.
FDG Dragon Wall Tile by skipatlan on Sketchfab
DRAGONBITE™ Community Creator model.
For suggested print settings, please download the free Dragonlock™ Ultimate: Free Sample Set here: /product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set
Download the free DRAGONBITE™ Clip model here: /product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
$2.00
|
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps. Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing? This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t... [click here for more] |
Fat Dragon Games |
$5.99
|
This set of 3D-printable STL models was born when I tried to model a multi-level fortress with stairs near the inside walls and some 5" wide rooms on the lower level. FDG Dungeon Expansion 11 has 2x1" models that would work, except they only have clip slots on the long side and I needed clip slots on the short edges too.
Thus, this set contains versions of the 2"x1" floor and walls from FDG Dungeon... [click here for more] |
Fat Dragon Games |
$5.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2: Wavy Walls set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls and floors. It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. However, this set uses the original wavy-style water,... [click here for more] |
Fat Dragon Games |
$14.99
|
This set of 3D-printable STL terrain was inspired in part by the introductory 5e Lost Mine of Phandelver adventure. One cavern in that adventure has bushes outside and a stream flowing out through the entry. Another area features a 500 year old cave, recently reopened for mining by new adventurers. These kind of settings suggested some of the cave entries you’ll find here.
Sample layouts:... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between.
(For the same models... [click here for more] |
Fat Dragon Games |
$14.99
|
Once I started working on a selection of 2x1" walls for the Enhanced 2x1" Dungeon Walls set, I realized there were only a limited selection of 2x1" models available. This set of 3D printable STL models provides eleven all new 2x1" tiles (each on a four-slot base) to complement the existing selection.
Models included in this set:
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Fat Dragon Games |
$9.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections! (The sample layout... [click here for more] |
Fat Dragon Games |
$10.99
|
This set includes a number of tower walls and floors to expand the selection in the FDG Tower of Terror set and the prior Tower Add-On 1 set. The two new styles are:
Tower walls with castle floors on the inside, and village sidewalk on the outside, for towers as part of a village map
Tower walls with castle floors on the inside, and dirt/grass on the outside, for outdoor towers
Each style includes... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D-printable STL terrain includes cavern stream tiles with stepping stones in the water. With these you can make a small crossing for your dungeon denizens (and the stones will surely twist and sink beneath the invading PCs!). For a larger crossing, try combining with the Floor Water B and Floor Water D tiles in the FDG Cavern Expansion 1 set.
RECOMMENDED PRINT SETTINGS... [click here for more] |
Fat Dragon Games |
$2.99
|
This set of 3D-printable STL terrain brings watery pools and streams to dungeon layouts. It includes two styles of wet dungeons, one with a brick edge and another with a rougher natural edge.
The plain water tile that matches the water texture used in this set can be found in FDG Dungeon Hazards & Traps.
Sample layouts in each style:
Recommended Print Settings:
Layer Size:... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes two styles of wet dungeons, with a brick edge and with a rougher natural edge. These models include wet floors adjacent to dungeon walls, and they can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain water tile that matches... [click here for more] |
Fat Dragon Games |
$11.99
|
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout? This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes. Combine with the starter Wet Caverns 2: Wavy Ground and Wet Caverns 2: Wavy Walls sets and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns... [click here for more] |
Fat Dragon Games |
$10.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge with... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2: Wavy Walls set and expansion Wet Cavern 2: Wavy Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with flat water areas... [click here for more] |
Fat Dragon Games |
$8.99
|
Chasms are great, but how about spicing up a cavern map with an underground river or lake? This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom. It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners.
As before, the chasm models in this set stick up far enough to make a smooth edge... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! (Just as Wet Caverns 2: Wavy Walls did for full-height walls.) Now you can create underground rivers, pools, and lakes up close to low cavern walls and entrances. These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D-printable STL models complements other sets such as FDG Dungeon Delve 1, Dungeon Delve 2, and Dragonbite Dungeon Balconies, to add pools at the elevated dais/balcony level. This set includes the following elevated pool tiles:
An elevated water tile
Two elevated "inner" pool corners (angled and straight)
Two elevated "outer" pool... [click here for more] |
Fat Dragon Games |
$4.49
|
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams. Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams.
(For the same models with a wavy water texture built into the models,... [click here for more] |
Fat Dragon Games |
$8.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Wavy Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain joins up multiple wet caverns, using wet corridors in between! These models have a wavy water effect built into the print, to fit with other wavy-water cavern pieces. (If you want flat water tiles to add your own water effect, see Wet Caverns 2: Low Corridors)
These lower corridors are:
Faster to print
Easier to see over
Easier to place miniatures... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on natural-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between! Compared to full-height cavern pieces, these lower wet corridors are:
Faster to print
Easier to see over
Easier to place miniatures close to -- especially important for tight corridors!
These corridors work well with both half-height... [click here for more] |
Fat Dragon Games |
$9.99
|
This set of 3D-printable STL terrain brings water to your half-height caverns! Now you can create underground rivers, pools, and lakes up close to lower walls and entrances. Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts!
Why half-height walls? These lower walls are:
Faster to print
Easier... [click here for more] |
Fat Dragon Games |
$11.99
|
This set of 3D printable STL models provides roofs for small houses, such as the buildings in the port village in the Kobold Docks map by Dyson Logos. This includes a pyramid-shaped roof for 4x4" buildings, and 2" roofs for small C, L, or T shaped buildings. These roofs can be used in conjunction with a number of FDG village sets, though the models are based on the roofs from... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D-printable STL terrain continues the Wet Dungeons line of watery pools and streams for dungeon layouts. It expands the selection of dungeon walls on brick-style wet dungeon floors, including more wall and post models as well as ruined wall models and a special bonus model. All these models can be mixed with other Wet Dungeons sets to make more elaborate layouts.
The plain... [click here for more] |
Fat Dragon Games |
$9.99
|
This set adds on to the Cliffside set with a road from ground level up to the cliff top.
See the cover image for a sample of the road and cliff as assembled.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 10% for all models recommended, 5% minimum
Top/Bottom Layers: 6 (or 0.9mm if using a different layer size... [click here for more] |
Fat Dragon Games |
$7.99
|
This set of 3D-printable STL models continues the Wet Dungeons line of watery pools and streams for dungeon layouts. Once again, it includes models for two styles of wet dungeons, one with a brick edge and one with a rougher natural edge. These models include water flowing through various doors, archways, and wall cracks, connecting pools in adjacent rooms. They can be mixed with other Wet Dungeons... [click here for more] |
Fat Dragon Games |
$12.99
|
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns. Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions... [click here for more] |
Fat Dragon Games |
$10.99
|
This set of 3D-printable STL terrain was inspired by the Dungeon of the Dead Three. That’s a basement dungeon, where the low points of the dungeon are flooded by foul-smelling water from the nearby sewers.
This set is designed so the sewer-flooded level is below a dry level of dungeon. There are two styles of tiles in the set to make this work (you can use either or both):
3” high... [click here for more] |
Fat Dragon Games |
$11.99
|
A haunted house deserves an interesting interior… after all, witches and hags leave their mark. Whether in the basement or locked away in a back room, these 3D-printable STL files will give some spirit to your haunted house!
Recommended Print Settings:
Layer Size: 0.15mm, or 0.1mm for finer detail
Infill: 15% for all models recommended, 5% minimum
Top/Bottom... [click here for more] |
Fat Dragon Games |
$7.99
|
Though there are a number of watery sets -- indoor, outdoor, and underground -- it seems a little boring to have just plain water tiles “in the middle.” This set of 3D-printable STL models spices up a river or lake with some wreckage that might suggest past (or future!) events. Kraken not included.
Note: there are two styles of water tiles in the Fat Dragon Games... [click here for more] |
Fat Dragon Games |
$4.99
|
A haunted house or spooky graveyard deserves more than a set of pristine walls… So this set of 15 3D-printable STL models builds on the FDG Cemetery set and the freestanding wall from FDG Village Items 2 to bring you more worn and busted-up walls. Perfect for that house that just hasn’t been tended for a decade or two… at least, not by living caretakers.
Note that the walls and posts here... [click here for more] |
Fat Dragon Games |
$9.99
|
It's not just for the Sinister Secret of Saltmarsh... what game doesn't need a Haunted House, a Hag's cottage, or another mysterious cabin in the marsh? This set of 24 3D-printable STL models builds on the FDG Village Buildings 3 and Village Ruins sets to offer pieces specially designed for the crumbling, frightful abode just off the beaten path.
Included Models:
Recommended Print Settings:
Layer... [click here for more] |
Fat Dragon Games |
$9.99
|