| Title |
Publisher |
Price |
DRAGONLOCK Lost City of the Dwarves™ is an all-new 3D printable terrain series that is the culmination of our 19 years of design experience in tabletop gaming. All models print supportless and are optimized for FDM 3D printers. Lost City of the Dwarves™ expansion sets will allow you to customize your dungeon layouts even further with the groundbreaking innovations you have... [click here for more] |
Fat Dragon Games |
$2.99 $2.69
|
DRAGONLOCK Lost City of the Dwarves™ is an all-new 3D printable terrain series that is the culmination of our 19 years of design experience in tabletop gaming. All models print supportless and are optimized for FDM 3D printers. Lost City of the Dwarves™ expansion sets will allow you to customize your dungeon layouts even further with the groundbreaking innovations you have... [click here for more] |
Fat Dragon Games |
$3.99 $3.59
|
DRAGONLOCK Lost City of the Dwarves™ is an all-new 3D printable terrain series that is the culmination of our 19 years of design experience in tabletop gaming. All models print supportless and are optimized for FDM 3D printers. Lost City of the Dwarves™ expansion sets will allow you to customize your dungeon layouts even further with the groundbreaking innovations you have... [click here for more] |
Fat Dragon Games |
$3.99 $3.59
|
Sewer LED Torch Tiles include 3 different sewer tiles with Torches. The LED is swappable in this version because the top of the sewer tiles are magnetic! They use 4x2 magnets that fit snug, but super glue is necessary.
There is a regular curved wall tile, a flat wall tile, and a flooded wall tile.
Image 1
Image 2
Image 3
Terms & Conditions for products by Fat Dragon Games can be found... [click here for more] |
Fat Dragon Games |
$4.99
|
THE CALL OF THE HYENA – BASE VERSION A DungeonisM Lab Old-School Adventure for AD&D, OSRIC, BECMI & OSE systems
Overview The Call of the Hyena is a 40-page A4 adventure module written in English and Italian, crafted for low-level characters (levels 2–3), and fully compatible with Advanced Dungeons & Dragons 2nd Edition,... [click here for more] |
dungeonismlab |
$2.99
|
Product contains: Aasimar Cleric - Althea - pre-supported 3d printable miniatureSculpted 1 inch round base - pre-supported 3d printable modelModels without supportsD&D 5e compatible statblocks... [click here for more] |
EverOn Games |
$4.99
|
Product contains: Chapel Ruins Terrain - Resin Variant - pre-supported 3d printable model with interiorChapel Ruins Terrain - Filament (FDM) Variant - supportless 3d printable model with interior Filament models print without the need for supports.... [click here for more] |
EverOn Games |
$19.99
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.
3D printing... [click here for more] |
Lord Zsezse Works |
$10.00
|
This set, Passageways, features all the pieces you need to fill out the interior corridors of a ship or station, gridded for 1 inch combat. Hallways, intersections, corner doors, everything you could need to diversify your ship layout is included
Space Ships is Aether Studios premiere line of Ship/starbase terrain. With over 700 models of Dragonbite terrain and miniatures in the Space Ships series,... [click here for more] |
Aether Studios |
$1.00
|
This set, Mad science, is one of Nasos contributions to this project. When talking about the kind of city Aethertowne would be, we all were inspired by Frankenstein and the idea of a mad scientist run amok in the city. This set helps reflect those inspirations and ideas. The idea grew over time with additional models including the large Astrolab.
We’ve updated this set since original release with... [click here for more] |
Aether Studios |
$4.00
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.... [click here for more] |
Lord Zsezse Works |
$10.00
|
5e DnD Villains to Threaten Campaigns, Challenge Players, and Inspire Adventures. What Stories Will You Tell?
Epic Campaigns start with extraordinary villains. This 5e supplement contains 12 unique villains and factions to disrupt your world and challenge your players.
Backstories and motives give each villain depth, their factions and resources affect your game world, and player backstory hooks... [click here for more] |
Leopard Print Press |
$25.00
|
ABATTOIR OF BABA YAGA – Chicken-legged Slaughterhouse Monster
Large 28mm scale miniature perfect for Weird Frontiers RPG, or other tabletop games.
NOTE: This STL set is part of the November Releases for Dark-Platypus Studios’ TRIBE, MUTANTS & MYTHS! You can get this model and a whole lot more for a significant savings by joining the TRIBE!
Pre-supported and unsupported... [click here for more] |
Dark Platypus Studio |
$6.00
|
Aethertowne Streets is one of the core sets from the Sky Islands Campaign. We wanted a full and diverse set of streets that would work for multiple eras. This set includes 28 models in .stl format for 3d printing. Colin Christenson crafted up this set to perfection, including several additional files since the end of the Kickstarter Campaign. We love to hear your ideas for expanding this set and you... [click here for more] |
Aether Studios |
$5.00
|
Dragons of the Red Moon: STL dragons pack 1
Hi Dragonbonded!
This file includes all the dragons that were unlocked in the Dragons of the Red Moon through Kickstarter!
From left to right
-Aureus Fulgen
-Sivax Magnifex
-Kuxcoatl
-Nixis
-Bastherox
-Rawraxxa
-Dehrilya
All Dragons include a scenic base and an alternate head (open or shut mouth so you can have both options).... [click here for more] |
Draco studios |
$50.00
|
We’ve wanted to this set for a very long time. We had calls to do this set before we took the name Aether Studios. We touched on the first elements back in 2020 with AEEAST02 Temple of the Astral Mother. But that was a long way off from what we and all the people wanted.
This set includes the hard work of Gyula, with a little help from Carl and Nasos. While it benefits from the AEKHMR01 core set,... [click here for more] |
Aether Studios |
$9.00
|
This set represents hundreds and hundreds of hours of work. It is among the finest collections of models we have ever produced. It is, without a doubt, the finest publication that I have had the honor to oversee as Director of Aether Studios. We promise to grow and improve this set over time as we continue to deliver on the promises made to our fans to bring their visions to life. Some of the best... [click here for more] |
Aether Studios |
$2.00
|
A 5e supplement with 22 unique boss fights and encounters for levels 1-20. Stat blocks, mechanics, maps, and item rewards galore!
Memorable Fights, Maps, and Epic Challenges
22 Boss Fights and Encounters
Unique, Memorable Mechanics
23 Battle Maps
144 Pages of Content
22 Magic Item Rewards
57 Stat Blocks
44 Custom Art Pieces
Plot Hooks and Story Continuations
Elevate your encounters and reduce... [click here for more] |
Leopard Print Press |
$25.00
|
When you seek a light in the darkness, we have the spark you need. But beware for lights may go out and in these dungeons it’s always darkest just before it goes pitch black! Also adding diagonal and curved walls, now with restraints!
Light those braziers and fight off the darkness brought forth by our very own cherished Colin Christenson. This set goes especially well lighting up our aedark series,... [click here for more] |
Aether Studios |
$7.00
|
Tower of Terror Brigde is an add on for the tower of terror, included is the expansion piece.
I printed the bridge with no supports.
As it says in the pics THE DOOR WALL FROM THE TOWER OF TERROR IS NOT INCLUDED!! ... [click here for more] |
snowrat |
$2.00
|
Interior scenery filler pieces to fill buildings
... [click here for more] |
Devious Games |
$3.00
|
TLG 8364.1
3D Printable Encounters
Mott’s Warband
3D1.1
$1.99; ISBN:
Mott’s Warband includes an encounter with a raiding band of five ogres. Stats for both Castles & Crusades and the 5th Edition of the Worlds most popular RPG are included at the end.
This encounter is designed for and inspired by the 3-D Printable Miniature Set Ogre Warband (FDG0274)... [click here for more] |
Troll Lord Games |
$3.00
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.
3D printing... [click here for more] |
Lord Zsezse Works |
$10.00
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.
3D printing... [click here for more] |
Lord Zsezse Works |
$10.00
|
Included in this release is a 3d print traditional Japanese teapot and cup from Nasos Maloudis. There is also a 18 page PDF on the lore behind the family that owns this teapot, their magic tea, the dragon they got it from, and their family. All written by Kira Lieper. ... [click here for more] |
Aether Studios |
Pay What You Want
|
This series, Junk Planet, was created by Colin Christenson as a compliment to our many other sci-fi sets, a place to visit on missions and a place to scrounge for parts between adventures.
Junk Planet 4 features more fantastic tile terrain from Will and Nasos, with a few special parts from Carl and Colin. Many thanks to the whole team for all the help on this one. We really had a blast putting this... [click here for more] |
Aether Studios |
$6.00
|
The Tarasque has been an iconic name (although spelled differently) in the world of Dungeons and Dragons for so long that most people have forgotten that the monster originates in ancient Christian folklore. The story of the Tarasque first appears in a work known as The Golden Legend, and this bundle focuses entirely on the mythology of this legendary monster and the lore surrounding... [click here for more] |
Red Panda Publishing |
$9.99 $4.99
|
Welcome to A World Of Frosty Magic And Festive Adventures! This 45-page book is your gateway to a holiday-inspired adventure, introducing fresh mechanics, rich storytelling and an unforgettable seasonal adventure. It’s crafted to bring the magic of the holidays to your gaming table, blending laughter, peril and a sprinkle of winter wonder.
Will your heroes save the Winter Solstice,... [click here for more] |
Yellowbyte Studios |
$4.95
|
A 5e supplement with 7 unique dungeons, boss fights, and special mechanics! For levels 3-11. Stat blocks, maps, and item rewards!
Memorable Fights, Maps, and Epic Challenges
7 Dungeons and Encounters Within
Overlying Dungeon Mechanics
20 Battle Maps
102 Pages
33 Stat Blocks
Plot Hooks and Story
Elevate your dungeons and reduce prep time with Drop in Dungeons and Encounters! This 100+ page... [click here for more] |
Leopard Print Press |
$25.00
|
The Ruins of Highspire stand as a haunting reminder of a once-mighty stronghold. This modular 3D-printable terrain set presents its crumbling towers and weathered stonework in stunning detail, perfect for tabletop RPGs, wargames, or hobby painting. Designed for versatility and ease of printing, the modular pieces allow endless layout possibilities and print without supports.
Whether... [click here for more] |
FoxCraft |
$30.00
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.
3D printing... [click here for more] |
Lord Zsezse Works |
$10.00
|
Legendary Dragons 3D pack 1
This pack includes the core models and some stretch goal models unlocked in Legendary Dragons 3D Kickstarter by LAIR, based in the 5th edition supplement Legendary Dragons by Jetpack7.
More than 30 models including 21 hightly detailed gargantuam dragons.
Red Great Wyrm
Glitz
Vanadon
Kiennavalyriss
Jormungand
Xavour
Kur
Ilizinnii
Balleg
Tyrnin
Kundal
Golthaarius
Umunairu
Naghi
Immryg-Umryss
Vyraetra
Balaur
Zuth
Salathiir
Xylaarion
Feth'Razaal... [click here for more] |
Draco studios |
$85.00
|
Scouts and Louts includes a run away encounter with a band of goblins. Designed for use with Castles & Crusades and the 5th Edition of the world’s most popular RPG. For 5th Edition stats, refer to the appropriate monster book already in your arsenal.
Inspired by and playable with the 3-D Printable Miniature Goblin Warriors Set 2 (FDG0241) produced by Fat Dragon Games. You can use it to... [click here for more] |
Troll Lord Games |
$3.00
|
A further addition to the Wizard's Tower 2 and The Wizard's Stronghold. Both Wizard's Tower 2 and Wizard's Stronghold are required for this to be used. ... [click here for more] |
Devious Games |
$10.00
|
This is an additional piece to the Wizard's Tower to give it extra height and a cave system below. You will need to have "The Wizrd's Tower 2" to use this properly. ... [click here for more] |
Devious Games |
$15.00
|
The Wizard's Tower gives you a tower for your wizard to reign from.
Check out this kickstarter for more information about what is included. ... [click here for more] |
Devious Games |
$15.00
|
Preorder all 9 sets for $60
Click now: Dungeon-X Late pledge preorder bundle
A truly cost-effective, print-yourself dungeon that is spectacular but doesn't require any additional painting work and you can set it up in no time!
How it works:
Print walls
Print out the wall pieces and cut them out easily along straight lines, then fold them in half.
3D printing... [click here for more] |
Lord Zsezse Works |
$10.00
|
The War series of terrain was created by Colin Christenson, but almost all of us at Aether Studios have had a turn with it. All of us love making wargaming terrain at Aether Studios. Some as an honor to their service or that of their loved ones, others purely for the art, and others still so that we don’t forget what it looks like when talking fails. Creating and publishing these sets as conflict... [click here for more] |
Aether Studios |
$6.00
|
The Horror of Harloch Hill includes an encounter with several owlbears. This is designed for use with Castles & Crusades and the 5th Edition of the world’s most popular RPG. For 5th Edition stats refer to the appropriate monster book already in your arsenal.
This encounter is designed for and inspired by the 3-D Printable Miniature Set Owlbears (FDG0260) produced by Fat Dragon Games.... [click here for more] |
Troll Lord Games |
$3.00
|
Included in this set is a Blacksmith House on a 6x6 Dirt/Thicket tile, and also available as Scatter terrain. Many other scatter models exist including a roof, weapons, and smithing tools.
... [click here for more] |
Aether Studios |
$5.00
|
Fifth edition has changed the rules for spell cone area of effect, the templates we used for previous editions no longer work. "A cone extends in a direction you choose from its point of origin. A cone's width at a given point along its length is equal to that point's distance from the point of origin." Any square more then half in this area is affected by the spell. Simple to describe - not so simple... [click here for more] |
3DModels |
$0.99
|
The Ruined Baths of Generica work well by themselves but look greate with the Ruined Courtyard sitting atop them.
Below with the Courtyard sitting atop, purchased separately.
... [click here for more] |
Devious Games |
$3.00
|
You get the files for dice and cards:
the wizard dice box base.stl
the wizard dice box base empty.stl
the wizard dice box lid.stl
The box has a unique design with illustrations engraved by
each face. The cavities were designed for standard dice set, however if you have a bigger set of dice you can re-scale the 3D file in your favorite 3D software for your oversize dice. Dimensions: 125mm... [click here for more] |
madchest |
$1.99
|
(This product does not come with the ruined aqueduct, it must be purchased separately)
The Aqueduct gives you enough files to make a modular aqueduct that can sprawl from one side of your tabletop to the other. It features a large pillar arch down low and a smaller arch to place on top. The top arch can also be used by itself as a smaller aqueduct if you wish.
This aqueduct reaches roughly 325mm... [click here for more] |
Devious Games |
$5.00
|
(This item requires The Aqueduct to be used, this purchase only includes 4 ruined pieces to add to the Aqueduct.
The Aqueduct ruins is the perfect addition to the Aqueduct giving you ruined sections to make breaks in the aqueduct as you want. This contains 2 ruined end pieces and 2 ruined pillars.
... [click here for more] |
Devious Games |
$5.00
|
The Ruined Courtyard works perfectly with the Ruined Baths which it can sit atop.
The Baths pictured below are available separately but work perfectly with this as they were made for it.
... [click here for more] |
Devious Games |
$5.00
|
Dragons of the Red Moon: STL dragons pack 2
(example of Kuxcoatl damaged parts)
Hi Dragonbonded!
This file includes extra parts to modify your dragon and also busts so you can print a larger head and have it as a sculpture.
The dragon parts that are not yet ready will be uploaded as they become sculpted and split for 3d printing. These will be... [click here for more] |
Draco studios |
$30.00
|
This series features the civilian models, vehicles, and buildings from our 6th Kickstarter. The civilians of New Sarsaparilla Colony are caught in the crossfire between the Military and Bugs for control of the planet. The first campaign has ended with a Bug victory, but the war is far from over.
This set features, Papa Jo, one of the original colonists of New Sarsparilla. Jo lost his hands fighting... [click here for more] |
Aether Studios |
$2.00
|
This series features the civilian models, vehicles, and buildings from our 6th Kickstarter. The civilians of New Sarsaparilla Colony are caught in the crossfire between the Military and Bugs for control of the planet. The first campaign has ended with a Bug victory, but the war is far from over.
This set features, Ramon Dollatru, a 2nd generation colonist of New Sasparilla Colony. Ramon is a courier... [click here for more] |
Aether Studios |
$2.00
|
This series features the civilian models, vehicles, and buildings from our 6th Kickstarter. The civilians of New Sarsaparilla Colony are caught in the crossfire between the Military and Bugs for control of the planet. The first campaign has ended with a Bug victory, but the war is far from over.
This set features the Saloon by Nasos Maloudis. This building is spacious, with ample area for scatter... [click here for more] |
Aether Studios |
$5.00
|
Log In 
