Title ▲ |
Publisher |
Price |
This generic Small Bunker is a 15mm (1:100 to 1:120 scale) STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This model comes in two parts. Print the bottom part with the floor on the print bed and the roof upside down.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports. ... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
3D printable / digital files only
1. For personal use only.
- selling or sharing of STL / digital files is prohibited
- sharing of download link is prohibited
- sharing, molding & casting of prints is prohibited
- altering my digital sculpt & calling it as yours is prohibited (slice & scale is ok)
- using my digital sculpts or part of it to make new content is prohibited
- sharing... [click here for more] |
Porc Skullpt IX |
Pay What You Want
|
This generic Small Bunker is a 28mm (1:58 scale) STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This model comes in two parts. Print the bottom part with the floor on the print bed and the roof upside down.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports.
This model can be scaled to different sizes.
25mm (1:64)... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
This set has a 2x4 path, 2x4 ground and 2 2x2 ground tiles for use wth Fat Dragon Games Shadow Grove Set
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum
Top/Bottom Layers: 8... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included are three 2x2 dungeon floor tiles:
2x2 with center dungeon stone wall
2x2 with center dungeon stone wall and edge stone wall (T intersection)
2x2 with center dungeon stone rectangle door base
In order to use the door, you will need to own a rectangle Door, Door Hinge, Door Lintel, and Door Plug which can be found in a number of Fat Dragon Games sets here on DTRPG.
DRAGONLOCK Ultimate:... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is an .stl file to print a cutting guide for 3" dungeon tile corners. Align the tabs with two sides of a 3" square and cut along the curve with a hot wire or knife. ... [click here for more] |
Highlander Studios, Inc, |
Pay What You Want
|
3D Print File: Alien Cactus (Multiple Settings: Space opera, mutant wasteland, fantasy, etc.) Spice up your gaming landscaping with this alien cactus. Is the cactus just a pretty background addition or does it have special game effects (such as shooting quills, giving off intoxicating vapors, or being edible or poisonous)? You decide!
Default model size: 16x28x16mm
We realize that... [click here for more] |
Fishwife Games |
Pay What You Want
|
3D Print File: Atomic Cactus
You stumble across the arid wasteland, pausing only to catch your breath and pray for a source of water. Finally, just as you are considering giving in and letting the two headed vultures feast, you spot it... a grouping of large, malformed cacti off in the distance. Your needs for liquid refreshment may be met yet... As you race towards the cacti you... [click here for more] |
Fishwife Games |
Pay What You Want
|
3D Print File: Office Chair This Pay What You Want file is a two piece office chair that is designed to fit typical 28 to 30mm miniatures. It can be easily resized to fit whatever scale you like. Default Parts Sizes: Base: 13x13x8mm Seat: 13.5x11x13.5mm Need help or recommended print settings? These are slow but here's what we often use in Cura with our Ender 3 and... [click here for more] |
Fishwife Games |
Pay What You Want
|
6 modern heroes, 4 modern heroines, 1 male corpse marker, 1 simple base for 28 - 32 mm miniatures. All files are in STL-format.
The models are intended to be printed on a resin printer. They have all been test printed on a Formlabs 2 resin printer and came out very good.
These miniatures are suitable for any RPG that takes place in the modern era, anywhere... [click here for more] |
Twin Engine Publishing |
Pay What You Want
|
A set of two square trays, one is 80mm wide and 16 mm high. The other is 70 mm wide and 14 mm high.
They are perfect token stays. Easily stackable and designed for maximum use of space. No branding, no wasted space.
... [click here for more] |
Twin Engine Publishing |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we recommend using... [click here for more] |
Via Ludibunda |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print some Drow or Dark Elves buildings just load them in the software provided with your 3D printer and print them as many times as you like !
The STL files are printable on any 3D printer, we... [click here for more] |
Via Ludibunda |
Pay What You Want
|
Here is a free sample of our upcoming 3D printable scenery range for Wargames and RPG.
You'll find enclosed stl files to print the model on any 3D printer.
This is a multi part model in 28mm scale that needs assembly as follow :
The recommended settings are for PLA printing on any entry level 3D printer, adapt as needed to your printer .
100 or 150 microns layer height
5% to 15% percent infill... [click here for more] |
Via Ludibunda |
Pay What You Want
|
STL files to 3D print scenery for wargames and roleplaying games on any 3D printer !
You will get a link to download an archive containing STL files that will allow you to print 4 different houses, just load them in the software provided with your 3D printer and print them as many times as you like !
You can mix and match some parts with the designs from the Village... [click here for more] |
Via Ludibunda |
Pay What You Want
|
From the DungeonisM workshops here is the first release of minimalistic 3D miniatures in .stl format for the Talisman Set: this set, in three parts, cover all the basic characters from the beloved Talisman game. The models, original and forged with LOVE, are in .stl format and are designed for printing with an average character height of 32 mm: however you can resize the print to your liking.
This... [click here for more] |
dungeonismlab |
Pay What You Want
|
From the DungeonisM workshops here is the first release of minimalistic 3D miniatures in .stl format for the Talisman Set: this set, in three parts, cover all the basic characters from the beloved Talisman game. The models, original and forged with LOVE, are in .stl format and are designed for printing with an average character height of 32 mm: however you can resize the print to your liking.
This... [click here for more] |
dungeonismlab |
Pay What You Want
|
From the DungeonisM workshops here is the first release of minimalistic 3D miniatures in .stl format for the Talisman Set: this set, in three parts, cover all the basic characters from the beloved Talisman game. The models, original and forged with LOVE, are in .stl format and are designed for printing with an average character height of 32 mm: however you can resize the print to your liking.
This... [click here for more] |
dungeonismlab |
Pay What You Want
|
From the DungeonisM workshops here is the first release of minimalistic 3D miniatures in .stl format for the Heroqest Set: this set, in three parts, cover all the miniatures from the beloved Heroquest game. The models, original and forged with LOVE, are in .stl format and are designed for printing with an average character height of 32 mm: however you can resize the print to your liking.
This set... [click here for more] |
dungeonismlab |
Pay What You Want
|
This a 2' and 4' Tilt bins with finger holes fir the Ultimate: GM Screen of DOOM
Found here https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
4-Rad Flamwagen Sci-fi Gaming Vehicle 3D Printable .STL files
1/35 scale model of a fictional assault. The files can be resized using a slicer program to any scale that suits you
All the parts of the flamwagen are interchangeable with the 4 rad srurmwagen, so for example you could build a sturmwagen with the wheels from a flamwagon, or a flamwagon with a gun from the sturmwagen.
This vehicle... [click here for more] |
Redstarkits |
Pay What You Want
|
4-Rad Sturmwagen Sci-fi Gaming Vehicle 3D Printable .STL files
1/35 scale model of a fictional assault. The files can be resized using a slicer program to any scale that suits you
I recomend 80% size print for 28mm games
This vehicle is good for wargames such as, Warhammer 40,0000, Weird world war II, Conflict 47, Warpath and many others. ... [click here for more] |
Redstarkits |
Pay What You Want
|
This generic Small Bunker is a 6mm / 1:285 scale STL model, suitable for WW1, WW2, Modern, and Science Fiction games.
This is for personal use only.
It is best printed with a 0.4mm nozzle at 10% to 20% infill without supports. ... [click here for more] |
Gallant Knight Enterprises |
Pay What You Want
|
This set, Gelatinous Stool, is a hilarious take on a classic foe by our co-founder Colin Christenson. Colin has been working on amazing ideas for years, and is the creator of the Sky Islands campaign that makes up the horizon of the World of Aach'yn. When he announced he was working on a Sky Islands sewer, I mentioned to him that all who worked on them before had produced a "turd" asset for us to... [click here for more] |
Aether Studios |
Pay What You Want
|
An Arakocra perfect for tabletop gaming! Print the body on its back. Print the wings as flat as possible with supports and a brim. Print the spear as flat as possible. ... [click here for more] |
mz4250 |
Pay What You Want
|
Want to access even more models not found here? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250
Patrons have access to all my files in one place, a request board, as well as commercial options! Come check it out :-)
... [click here for more] |
mz4250 |
Pay What You Want
|
You're walking in the woods.
There's no one around and your phone is dead.
Out of the corner of your eye you spot him:
Shia LaBeouf!
Its Actual Cannibal Shia LaBeouf, now ready for your tabletop game!
Based off the internet classic: https://www.youtube.com/watch?v=o0u4M6vppCI
And here is a write up for your 5e game: http://imgur.com/GyFxCFn
Print him with supports and... [click here for more] |
mz4250 |
Pay What You Want
|
One side of these 3D printable coins has a 20 embossed on it (for Advantage in 5e).
The other side of these 3D printable coins has a 1 embossed on it (for Disadvantage in 5e).
File set prints a set of 6 coins, enough for a DM and 5 players. Keep track of (dis)advantage, critical hits/failures, etc.
Coins are 1" wide and roughly 1/8" thick. Don't require primer unless you're feeling the groove.
My... [click here for more] |
Menagerie Press |
Pay What You Want
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s... [click here for more] |
Aether Studios |
Pay What You Want
|
Time to construct some Dark Dwellings, This set gives everything you need to start all your own large dark manor. This free starter set of dragonbite compatible tiles will let you dip your toes into the Dark Terrain series. All of these unique tiles are designed for building, stacking, and growing your collection.
... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set of 3d printable terrain you will find 19 .STL models for creating dwarven dungeons. This tile set features walls, doors, corners, and corner pillars needed to make rooms of any size that connect to each other with Dragonbite clips.
This set has 3 styles of terrain:
Resized Legacy tiles match our original sculpts, but as the name suggests they are all slightly resized to match... [click here for more] |
Aether Studios |
Pay What You Want
|
Fantasy Villages is our Patron backed series of fantastic locales, hamlets, and signs of civilization in a wild world. This particular set, The Oaken Muffin Guest House, was made by our friend Muzden as a special gift to the patrons. Muzden has worked with Aether Studios since 2019 on a variety of projects and wanted to do a small series of houses for the patrons as a thanks. This is the first of those... [click here for more] |
Aether Studios |
Pay What You Want
|
Turu is the Shellfather of all turtle-kind and is a generally a friendly deity to those who respect his many children. Turu is not the largest or strongest god, but he is quite possibly the oldest. The children of Turu who reach the size of their father are few, generally dying of heart break. The loss of a favorite dwelling, water, or food source can be deadly to those who grow attached to the physical... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set of 3d printable terrain you will find 12 STL models for making Hedge Mazes. All the basic models you need are included. If you like the set, please consider supporting us on patreon or picking up one of the many other sets in our store.
... [click here for more] |
Aether Studios |
Pay What You Want
|
A free set of our alien lair terrain! This terrain series is the culmination of 3 years of work by the staff of Aether Studios. Every single tile is equipped for LED lights underneath. Everything you need to get started making complete rooms is included. If you like the set, there are many expansions to check out! Unfortunately, DTRPG doesn't care to provide a proper Image Server. You'll have to check... [click here for more] |
Aether Studios |
Pay What You Want
|
This FREE set of miniatures contains 20 models of our Gremlin Warband. These models are available both Presupported for Resin Machines and unsupported for your own supports. The Gremlins of Aach’yn are nasty little buggers. The natural enemies of the Dwarves with whom they compete for techno-magical mastery. They can be found all over the world and the Sky Islands beyond in settlements, workshops,... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable terrain and miniatures, Pharaoh 6, was made by all of the Aether Studios artists together. Everyone contributed to this set, with Tia making the first textures, Jake making the animals, Colin with the Ram, Jeromy with scatter, Will and Nasos with the rest. Pharaoh has long been a collaborative experience and this set is the paragon of our progress so far. We hope you enjoy... [click here for more] |
Aether Studios |
Pay What You Want
|
This set is dedicated to Windy Wolfe, the Assistant Director of the Studio. At first glance it might seem odd to honor someone with a set of sewers, but not in this case. These sewers are some of the finest models we have ever published. You could say that they are the complete package, full of possibilities and wonderfully created. When you add to the facts of how much of my …. she has had to deal... [click here for more] |
Aether Studios |
Pay What You Want
|
Space Ships 3 is the next in Will Walker's line of beloved space terrain. 50+ STL 3d printable files are included in this Core Set, including everything you need to make a magnificent space ship or station. This is one of our patron supported sets. Over 500 additional models available to our patrons. You can find a link to the Patreon included in the Readme.
RECOMMENDED PRINT SETTINGS
● Layer... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this free bonus to the Tycho City mega set is a battery powered tealight capable Airbender statue. Originally crafted by prolific thingiverse artist OrangeWine, this statue has been carved out to allow a tealight to shine through in multiple areas.
Airbender Display by tychocity on Sketchfab
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
An Alchemist's Set.
The Zip contains 3 files.
One includes the alchemist's chemistry set
the two others files are potions and poisons.
Check out the kickstarter this came from if you haven't already backed. ... [click here for more] |
Devious Games |
Pay What You Want
|
A glorious Angel perfect for your tabletop game! Print each piece with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
Animated armor perfect for your tabletop game! Yes I'm the original artist who posted these on reddit a while back, who is sticking to posting neutral minis that won't offend Wizards. Print the body on its back with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
An ankheg perfect for your tabletop game! Print each piece as flas as possible with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
Jungle encounter? Why not throw in some apes?! This set includes a baboon, gorilla, and Kong sized giant gorilla!
You can print these as is with supports and a brim. ... [click here for more] |
mz4250 |
Pay What You Want
|
Here is an assassin / rogue perfect for your tabletop game! Print him with supports and a raft. Prints well on his back... [click here for more] |
mz4250 |
Pay What You Want
|
This is a collection of three different assault scout models
AssaultScoutMini-fn30.stl - This is a recreation of the the original UPF Assault Scout miniature produced back in the 80's for the Star Frontiers RPG. It was produced at the same scale as the original minature and stands 20mm (0.8") tall when printed. It was originally designed for FDM printing and so has a low poly... [click here for more] |
New Frontier Games |
Pay What You Want
|
An assorted collection of NPCs perfect for your tabletop game! In this collection you'll get:
Acolyte
Arch Mage
Assassin
Bandit
Bandit Captain
Berserker
Commoner
Cult Fanatic
Cultist
Druid
Gladiator
Guard
Knight
Mage
Noble
Priest
Scout
Spy in the bushes
Thug
Tribal Warrior
Veteran Fighter
Print these with supports and a raft. Blender files have been included... [click here for more] |
mz4250 |
Pay What You Want
|
These plants have come alive and are pissed! 3D print these living plants to add a greeny threat to your pc's in your next tabletop game!
Print the shrub as is with supports and a raft. Print the tree parts with supports and raft, and glue together. Use a wood burner to meld together if needed. ... [click here for more] |
mz4250 |
Pay What You Want
|
Need a tempermental bird in your campaign? Look no further than the Axe beak!
Print as is with supports and a brim or raft. ... [click here for more] |
mz4250 |
Pay What You Want
|