| Title |
Publisher ▲ |
Price |
A 4in x 4in asian-style building with alternate roofs. ... [click here for more] |
3dprintcraft |
$4.99
|
A 4in x 4in hobgobliin dwelling with three alternate roofs, allowing three different-looking buildings. ... [click here for more] |
3dprintcraft |
$4.99
|
A massive set of walls for an Asian-Style city, with towers, gates, ramparts, and street tiles. This set contains 35 .stl files that allow you to build a huge fortification and (when used with our buildings) create an entire Asia-style city. ... [click here for more] |
3dprintcraft |
$19.99
|
This zip file contains everything needed to build a large, Asian-Style house, suitable for a tradesman, craftsman, or for use in the compound of a noble family. The file contains a riser that allows you to create buildings of varying heights, which allows a more natural appearance when more than one of these houses is in your village. ... [click here for more] |
3dprintcraft |
$9.99
|
This zip file contains stl files for printing an Asian-style shrine for RPG or wargaming, based on the Shinto style. There are two pieces -- the base and the roof. ... [click here for more] |
3dprintcraft |
$3.99
|
A simple Asian-Style briidge (no decorative railing) and a set of cattails, lily pads, and rocks. These are stl files for 3D printing, not physical models. ... [click here for more] |
3dprintcraft |
$4.99
|
Great forests of bamboo add a distinctly non-western flavor to miniatures games, and this set gives you the flexibility to arrange bamboo on the table in any way you want. A peg-and-hole arrangement permits you to create "walls" that take any path, so they don't look too much like they're following strict angles. These are scaled at 28mm, and are files for 3D printing, not physical miniatures. ... [click here for more] |
3dprintcraft |
$9.99
|
Our buildings are designed to be used either as free-standing "scatter" (in which case you don't need this file) or to be glued to these Dragonbite bases for use with other interlocking pieces. Rather than include the bases with each building, which would mean people download them over and over again, we have put them into this file for download so you don't end up with multiple copies of the same... [click here for more] |
3dprintcraft |
FREE
|
This is a 4 inch by 6 inch building for use in wargaming or RPGs (28mm scale). The building has detailed interior space.
To mount this building on a Dragonbite base, download the free base files from https://www.drivethrurpg.com/product/279771/Bases-for-Buildings ... [click here for more] |
3dprintcraft |
$1.00
|
A Death-Mortar, a convenient pile of ammunition, and five Asian-Style barrels for gunpowder or other arcane materials used in firing. This is a perfect siege weapon for hobgoblins and any minions of a powerful artificer! Prints in 28mm scale. This is a file for 3D printing, not a physical mini. ... [click here for more] |
3dprintcraft |
$5.99
|
A barracks building for hobgoblin troops, The building measures 6 inches x 4 inches and has interior as well as exterior detail.
Dragonbite bases for this building may be downloaded free at https://www.drivethrurpg.com/product/279771/Bases-for-Buildings ... [click here for more] |
3dprintcraft |
$4.99
|
This huge set allows you to build the outer walls of a hobgoblin city, with defensive ramparts and towers. Tiles for streets are also included as a bonus feature. The set contains 35 .stl files and can be used (along with our hobgoblin buildings) to create a vast city for your hobgoblin king or other evil overlord! ... [click here for more] |
3dprintcraft |
$19.99
|
Moon Bridge and a complex Torii Gate for Asian-Style RPG or wargaming. ... [click here for more] |
3dprintcraft |
$9.99
|
When this gong shows up on the gaming table, your players will sit up and pay attention fast; nothing says "Reinforcements are on the way" like a giant, reverberating stroke of a gong. This is a .stl file for 3D printing; no physical miniature is included. ... [click here for more] |
3dprintcraft |
$2.99
|
A multi-tiered pagoda that can be built to any height by increasing the number of middle tiers. ... [click here for more] |
3dprintcraft |
$14.99
|
An village well (Asian-style) with roof and cover (6 pieces). The piece prints at 28mm scale and is suitable for historical wargaming as well as RPGs. This is an .stl file for use with a 3D printer, not a physical mini. ... [click here for more] |
3dprintcraft |
$3.99
|
Alarums and excursions! No orcish camp or human castle is complete without a way to warn of impending attack. This 2-part drum serves the purpose admirably for your tabletop games. STL files for use with 3D printers; no physical product is included. ... [click here for more] |
3dprintcraft |
$2.99
|
A fully supported STL file of a giant flying laser tower of doom called a Menhir, from WORLDBREAKER RPG. Can be printed with or without dust effects.
Scale: If you print this to be approximately 12 inches tall, it will be to scale with typical 28mm / heroic scale tabletop miniatures.
Sculpted by Marcin Koryszewski for the WORLDBREAKER / Dark Tides of Zaratos Kickstarter. ... [click here for more] |
Ability Score Games |
$1.99
|
This set, Gelatinous Stool, is a hilarious take on a classic foe by our co-founder Colin Christenson. Colin has been working on amazing ideas for years, and is the creator of the Sky Islands campaign that makes up the horizon of the World of Aach'yn. When he announced he was working on a Sky Islands sewer, I mentioned to him that all who worked on them before had produced a "turd" asset for us to... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL terrain was built to expand the World of Aach'yn. It is a desolate and dangerous place; the cultist of Zol'Tigan are known for kidnapping stranglers on caravans and even straight from the major cities. The unwilling are sacrificed to bring forth the Demon Prince Zol'Tigan into the mortal plane, where he can grant evil wishes and summon undead armies from the victims. ... [click here for more] |
Aether Studios |
$6.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his tower... his tower... Let's just say you would only go there if you were very, VERY desperate to save someone... someone so important to you, that your own life was hardly a consideration. Because you'd surely be leaving it behind.... [click here for more] |
Aether Studios |
$5.00
|
This set of 3D-printable STL miniatures and terrain brings a Gnoll party to life. It includes a Gnoll Chief, Brute, and Scout, as well as their camp site. Two of the gnoll miniatures should be printed with supports, and the supports are built into the models -- simply remove them after printing.
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill:... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable STL miniatures and terrain brings an Orc tribe to life. It includes:
An Orc smith (two versions provided, with built-in supports for FDM and resin printers)
An Orc warrior
The Orc king's throne, with or without the king himself
An Orc hut
An Orc watchtower
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill: 10% recommended... [click here for more] |
Aether Studios |
$12.00
|
Ben Gayer is the artist who sculpted this Large three part Cypress tree. Inside are room for 2 minis to hide in ambush, awaiting their prey. This great Cypress Hideout was sculpted for the patrons of Aether Studios. The tree parts print without supports and connect with Dragonbite clips.
... [click here for more] |
Aether Studios |
$3.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his cultists live only to serve him. Therefore, they must be able to gather and hold the "raw material" for these terrible ceremonies. The bone pits are where such unfortunates may be found.
This set includes both a scatter version... [click here for more] |
Aether Studios |
$4.00
|
Link to Our Minihoarder Store This set of 3D-printable STL terrain was created to provide physical outdoor statues for the game world of Aach’yn. Specifically, each of the locations that the bard Kepethi marked on the road between the capitol, T’chel and the Queen’s city, Vrai. Kepethi was outcast from T’chel by the command of his great grand uncle, the Autarch. Coming from the noble family,... [click here for more] |
Aether Studios |
$4.99
|
This set was brought to glorious life by Nasos Maloudis over a year ago, but got lost in the limbo that is the development cycle. It pairs perfectly, and was designed with, with AEAACH09. But in reality, it is a stone tower on both tiles and scatter. It can go wherever you, the DM, decide.
... [click here for more] |
Aether Studios |
$6.00
|
Raz' Noklash is amoung the most feared beings in existence. He hunts and eats when he is hungry, or when he senses something that could possibly one day be a threat to his existence. In every single recorded instance, only once have survivors been found. The price of the lives, a dragon egg. Raz is relentless, brutal, and efficient in his methods of working psionic magics and a grabbing tongue that... [click here for more] |
Aether Studios |
$3.00
|
The God of Hunger is among the most fearsome creatuers on Aach'yn. His feeding mouths can reach across miles, devouring entire caravans in minutes. There is little defense but run and look for higher ground. Mouth pincers routinely crush through barriers of arcane and physical with ease. Nothing restrains the old hungry one.
This model was sculpted by Aether Studios' Jacob Armour for our Kickstarters,... [click here for more] |
Aether Studios |
$3.00
|
The demongod of fear, Rub'aii, is one of the oldest and most active deities on the planetoid. He is seen very differently among the races. Among most of the civilized world he is not worshiped, but rather his defeat is celebrated. Surviving another month, and living as a good citizen is all one needs to revel in celebration of Rub’aii.
Rub’aii has not actually been seen since the 4th age, and... [click here for more] |
Aether Studios |
$2.00
|
Ququmatz it the Azite god of Unity. His tribe are the current rulers of the city state of Aztlan. Through their laws they enforce the unity of the scale. Humanoids of many races, including dwarves and elves are hunted with impunity and without remorse when captured. If not killed immediately, they will be sacrificed in ancient rituals by the Ququmatz royal family to strengthen their grip on control... [click here for more] |
Aether Studios |
$3.00
|
The Lord of the Hive is a massively sized custom insectoid god from our Aztlan Awakens Kickstarter. Moozet is the Lord of the Hive and worshiped by the Al-Aki race and others that dwell in the sandy wastelands of Aach’yn. Measuring 200mm deep, 175mm high, and 147mm wide he will is an imposing presence when dropped on a table. Moorzet was designed to specifications by Dave Dostaler and sculpted up... [click here for more] |
Aether Studios |
$3.00
|
Balanza Yuum is the original serpent that Tlaloc mated with to reseed the race of scales. Since that time thousands of years ago, he has grown to great size and enjoys virtual immortality through his union with the Goddess of life. He prefers to ignore the above world, but will surface and appear during ritual ceremonies by priestess of Tlaloc. This is a defensive weapon for the tribe, as Balanza Yuum... [click here for more] |
Aether Studios |
$3.00
|
The Mount of the Waterways is one of the most elusive of the Gods of Aach’yn. Hippocamp is always in motion, travelling various oceans of the interconnected realms. His ability to create portals between bodies of water makes him among the most sought after for aid. He has no church or established faith, but will grant favors in exchange for songs he has not yet heard, making him a patron deity of... [click here for more] |
Aether Studios |
$3.00
|
These scatter models were sculpted by every one of our artists. Thicket is our most widely used woodland scatter asset pack and now we have prepared the models for wide remixing.
These models all print without supports on FDM machines and are the perfect scatter terrain for your woodland games. We hope these models amaze and delight your players.
... [click here for more] |
Aether Studios |
$6.00
|
This set has been a long time coming. When Carl started with Aether Studios several years ago, he said he wanted to do a meso-american set. I told him to slow his horses, Aztlan was already our biggest set. But Carl was patient, and the more I thought about it and saw his incredible work, the more I was sure.
Carl was the person to make the next iteration of Aztlan.
Building on everything we learned... [click here for more] |
Aether Studios |
$9.00
|
This set has been a long time coming. When Carl started with Aether Studios several years ago, he said he wanted to do a meso-american set. I told him to slow his horses, Aztlan was already our biggest set. But Carl was patient, and the more I thought about it and saw his incredible work, the more I was sure.
Carl was the person to make the next iteration of Aztlan.
This third set in the series of... [click here for more] |
Aether Studios |
$7.00
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn’t want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This starter set is a full and complete series of walls, water, channels, and everything else you need to make a vast sewer dungeon. Aztlan is Will’s... [click here for more] |
Aether Studios |
Pay What You Want
|
Aztlan Sewers is a set we have wanted to do for a long time, but we had to do it right. We didn't want a sewer system that was less epic than the previous one we did for the community creator program, so we spared no expense of time to make sure of it.
This expansion allows for sewers of difference sizes, both half sized, double height, and 4x4 spaces. Will and Carl powered through all month to make... [click here for more] |
Aether Studios |
$10.00
|
Deep in the darkest jungles where man fears to tread, there lies jungles of such depth they often cover the far past. Takes these Dwarven ruins for instance… what mad dwarf would live in a jungle? Yet here they dwelled. The mystery deepens.
This set represents the finest from our jungle work. Jungles are something we’ve wanted to do for a while, but we wanted to make sure we did perfectly and... [click here for more] |
Aether Studios |
$4.00
|
This set of 3D-printable village signs lets you outfit any DragonlockTM-compatible building with custom hanging signs. It includes both a variety of plain designs for your own artwork or decals, and textured wood signs that announce their own purpose. Overall there are more than 20 STL models of the signs, plus several pole and hook models that the signs can hang from.
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$8.00
|
This miniature, Skull Taker, was sculpted by Nasos Maloudis and remixed by Will Walker. It is a reward for the backers of Explore Dungeons #1, a Kickstarter from our long time friend, patron, and backer Chris G. Williams. Skull Taker is featured in one of the adventures in this spectacular eZine and we are very pleased to bring him to life. We later released this as a patreon reward to our amazing... [click here for more] |
Aether Studios |
$1.00
|
Aztlan is a 3D-printable Mesoamerican tileset by Aether Studios. Aztlan was our very first original set and after 2 years we wanted to expand it based on the requests by our many fans and patrons. Aztlan Clip-On was one of our most often requests. We wanted to make sure the first set had everything you needed to get started, but to get the full utility of this set, we recommend you pick up free the Aztlan... [click here for more] |
Aether Studios |
$15.00
|
Time to construct some Dark Dwellings, This set gives everything you need to start all your own large dark manor. This free starter set of dragonbite compatible tiles will let you dip your toes into the Dark Terrain series. All of these unique tiles are designed for building, stacking, and growing your collection.
... [click here for more] |
Aether Studios |
Pay What You Want
|
When you seek a light in the darkness, we have the spark you need. But beware for lights may go out and in these dungeons it’s always darkest just before it goes pitch black! Also adding diagonal and curved walls, now with restraints!
Light those braziers and fight off the darkness brought forth by our very own cherished Colin Christenson. This set goes especially well lighting up our aedark series,... [click here for more] |
Aether Studios |
$7.00
|
This set is a joining of two initiatives. Colin’s original plans were for a very modest expansion of tall cellar walls and all the delightful scatter needed for a small winery. At the same time one of our most faithful patrons, Bree, suggested that some traps from a project half a decade past could be repurposed, remixed, and expanded upon to make the dungeons a little darker.
... [click here for more] |
Aether Studios |
$7.00
|
This set of 33 3D-printable STL models comes out of the strange sort of dreams that might inspire (or be inspired by) Alice in Wonderland. Though there are all kinds of dreams to explore, we began with broken geometric walls and strange outdoor markings.
... [click here for more] |
Aether Studios |
$12.00
|
This small set was the Dungeoneer bonus set for DungeonPrint patrons in October, 2018. The 3D-printable STL models it contains accompany the main Dreamland set, providing some mind-bending furniture (bed, chair, table, clock) and an uprooted tree to populate your dreamscapes.
These models are compatible with all 3D-printed terrain.
Recommended Print Settings:
Layer Size: 0.15mm,... [click here for more] |
Aether Studios |
$3.00
|
This set of 3d-printable STLs lets you print fantasy rowboats, with or without front-mounted hanging lanterns (and with or without nets and barnacles for decoration). The cover photo shows a painted version of the rowboat with lantern.
If you'd like a bigger or smaller boat, the rowboat, lantern, and oar models can be scaled accordingly.
Recommended Print Settings:
Layer... [click here for more] |
Aether Studios |
$4.00
|
Included in this set of 3d printable terrain you will find 59 .stl files for creating a diverse dockyard village for your town. All models clip together with dragonbite clips for expandability.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm... [click here for more] |
Aether Studios |
$15.00
|
Log In 
