| Title ▲ |
Publisher |
Price |
This set, Gelatinous Stool, is a hilarious take on a classic foe by our co-founder Colin Christenson. Colin has been working on amazing ideas for years, and is the creator of the Sky Islands campaign that makes up the horizon of the World of Aach'yn. When he announced he was working on a Sky Islands sewer, I mentioned to him that all who worked on them before had produced a "turd" asset for us to... [click here for more] |
Aether Studios |
Pay What You Want
|
This set of 3D-printable STL terrain was built to expand the World of Aach'yn. It is a desolate and dangerous place; the cultist of Zol'Tigan are known for kidnapping stranglers on caravans and even straight from the major cities. The unwilling are sacrificed to bring forth the Demon Prince Zol'Tigan into the mortal plane, where he can grant evil wishes and summon undead armies from the victims. ... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his tower... his tower... Let's just say you would only go there if you were very, VERY desperate to save someone... someone so important to you, that your own life was hardly a consideration. Because you'd surely be leaving it behind.... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable STL miniatures and terrain brings a Gnoll party to life. It includes a Gnoll Chief, Brute, and Scout, as well as their camp site. Two of the gnoll miniatures should be printed with supports, and the supports are built into the models -- simply remove them after printing.
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill:... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable STL miniatures and terrain brings an Orc tribe to life. It includes:
An Orc smith (two versions provided, with built-in supports for FDM and resin printers)
An Orc warrior
The Orc king's throne, with or without the king himself
An Orc hut
An Orc watchtower
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill: 10% recommended... [click here for more] |
Aether Studios |
$12.00
|
This set features many different options for helping to build out Orc villages. The Orcs of the Orgraki are fearsome warrior who prefer to lead balanced lives. Led by Kurk Orgraki, they embrace both the old ways of hunting and the new ways of gathering. We hope they make a welcome addition to your Orc Lands.
... [click here for more] |
Aether Studios |
$8.00
|
Included in this set of 3d printable terrain you will find 10 .stl files for creating a huge single-roomed mansion. Ample fighting space on the roof allows for archers to better defend this locale. In our game world of Aach'yn, Tindar is an old revolutionary, long opposed to the rule of the Autarch. His magic and his wealth fuel a decades-old campaign against an evil despot who rules with a bloody... [click here for more] |
Aether Studios |
$7.00
|
This massive floating fortress prints in 16 Ender 3 sized sections. It features large sections of playable interior areas with a Dwarftek theme. Original sculpt work by Max Bugor, interior with work from the whole team at Aether Studios.
Many thanks to Andrew for helping bring this creation to life.
... [click here for more] |
Aether Studios |
$18.00
|
This set features many new palisade walls from Carl, along with a very awesome and supportless-printing 4×4 War Drums and 8×8 Clan Hut. The Grozkush are a very industrious tribe of Orcs, and among the friendlier groups you are likely to meet. They travel from village to village, selling their services – building palisade walls for small towns. No one knows better than the Grozkush Orcs how to build... [click here for more] |
Aether Studios |
$18.00
|
Dare you enter where spirits tread? Deep in the wilds of Aachy’n there lies a long forgotten hidden temple. Ravaged by time and mighty beasts this temple still stands. What lies inside beside the dead? Treasures, forgotten secrets and lore? Come, find out! Large walls, Grand entrances, caves and more!
... [click here for more] |
Aether Studios |
$15.00
|
The Tiburnado is one of many natural threats on the World of Aach'yn. Between many of the major cities lie vast seas of ultra fine silt. Sand so fine that you can drown in it, boats can float on it, and many species of shark can swim through it like water. When terrible wind storms combine with these seas of sharks, the Tiburnado is born. Run! ... [click here for more] |
Aether Studios |
$2.00
|
The face in the storm rises! Included in this 3d printable set of scatter terrain is 2 part model that connects together with dragonbite clips and is sure to terrify your players. The Dust Demon is evil, born into the elements. Often they are the soul of a great wizard that refuses to pass on to the afterlife. Less so, a lost infernal or other trapped planar essence. No matter the source, they are... [click here for more] |
Aether Studios |
$2.00
|
Ben Gayer is the artist who sculpted this Large three part Cypress tree. Inside are room for 2 minis to hide in ambush, awaiting their prey. This great Cypress Hideout was sculpted for the patrons of Aether Studios. The tree parts print without supports and connect with Dragonbite clips.
... [click here for more] |
Aether Studios |
$3.00
|
This giant 150mm scatter cage provides a massive space to put NPCs or wayward players. The door slots down into place and raises for easy access. All models print without supports. Gremlin Miniature not included. This model was sculpted by Nasos Maloudis for the patrons of Aether Studios. ... [click here for more] |
Aether Studios |
$2.00
|
This giant piece of scatter terrain prints roughly 100mm x 100mm and makes a great place to leave a sacrifice, offering, or just have a little high ground encounter. It was sculpted by Jeromy K. Smith for the wonderful patrons of Aether Studios. It was later expanded with tile versions based on our grass and thicket terrain styles. ... [click here for more] |
Aether Studios |
$2.00
|
This set of 3D-printable STL terrain was built to expand the the World of Aach'yn. In our mythos, Zol’Tigan is the demon prince of unwilling human sacrifices, and his cultists live only to serve him. Therefore, they must be able to gather and hold the "raw material" for these terrible ceremonies. The bone pits are where such unfortunates may be found.
This set includes both a scatter version... [click here for more] |
Aether Studios |
$4.00
|
Included in this 2 piece set is a simple, but giant scatter feature. The Domain of Rub'aii is one that is rarely transgressed. Worshiped by the Goblins, Gremlins, and even cannibal Gnome clans on Aach'yn, this deity holds complete sway over the domain of fear and suffering and is given offerings monthly by his devotees. Those dragged down into the domain of Rub'aii never return.
Many thanks to my... [click here for more] |
Aether Studios |
$4.00
|
Link to Our Minihoarder Store This set of 3D-printable STL terrain was created to provide physical outdoor statues for the game world of Aach’yn. Specifically, each of the locations that the bard Kepethi marked on the road between the capitol, T’chel and the Queen’s city, Vrai. Kepethi was outcast from T’chel by the command of his great grand uncle, the Autarch. Coming from the noble family,... [click here for more] |
Aether Studios |
$4.99
|
Included in this set of 3D-printable STL models from Jeromy K. Smith you will find the awesome battlements of Rub'aii. The Demonprince of Fear has many cultists that defend his twisted temple of nightmares. Inside you will find 16 models 7 Scatter terrain models and 9 Tiles for the Dragonlock terrain system.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$8.00
|
This set of 3D-printable scatter terrain from Nasos Maloudis features a giant working door for your Big Bad Evil Guys. In the World of Aach'yn lore, those taken through the Gate of Rub'aii are never seen again. Will your players be the first to conquer the Demonprince of Fear?
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$6.00
|
Petroglyphs 1 from Aether Studios artist Benjamin Gayer is the first of three sets foretelling the arrival of a great evil from the stars above. These 3d printable terrain files are available on both scatter and Dragonite compatible tiles matching our Peaceful Dirt and Aether Deserts terrain. On each model you will find a number of engraved primitive symbols, including many prominent swirly... [click here for more] |
Aether Studios |
$8.00
|
This set of 3D-printable terrain expands on the original Petroglyph set with new STL models, including some very large 6" by 6" features. Included are 7 new models on both scatter and DragonbiteTM tile bases. These petroglyphs tell the story of the great evil pyramid that falls from the skies. If the bravest souls in the land are not sent to abjure the evil, it will spread eventually consuming and... [click here for more] |
Aether Studios |
$10.00
|
This three part print has space inside for two miniatures to ambush your players. This Cypress tree was sculpted by Ben Gayer for the patrons of Aether Studios. The tree parts print without supports and connect with Dragonbite clips. ... [click here for more] |
Aether Studios |
$4.00
|
This selection of scatter contains art from multiple Aether Studios artists. Our patrons ask for portals all the time. This is a selection of the ones we’ve made for them. ... [click here for more] |
Aether Studios |
$9.00
|
Welcome to Xavar’s Rise, one of the newest creations from Head Sculptor, Nasos Maloudis. This set was originaly going to be put in with our caves and caverns, but it is just too good to not to be a solo set! This massive 6×6 tile is done in Thicket, Cavern and Scatter versions, all included. Included as well are the floor pieces, slopes and ends to make this a complete set and cover those ends.... [click here for more] |
Aether Studios |
$3.00
|
Check out our patreon where we publish our patron requests and other awesome sets like this one.
Included in this 3d printable set of scatter terrain is 2 part model that connects together with dragonbite clips and is sure to terrify your players.
... [click here for more] |
Aether Studios |
$4.00
|
A dream a night is all he visits... but those he visit often end up dismembered, broken, shattered... or dead. Usually dead. But if you do survive the horror.... your life will never be the same.... trust me....
Krannaou came about because a good friend of Will's was looking for some evil to write lore for, and here he be our first devil.... Krannaou Dreamhaunt.
Comes with resin supported wings version... [click here for more] |
Aether Studios |
$1.00
|
They say devils are charming and two faced. Serrak is no exception! Whether he is showing his light or dark side Serrak is a force to be reckoned with.
Brought to life by our head sculptor Nasos Maloudis we hope you enjoy this two faced demon. Both Supported and unsupported versions included as well as the Lychee slicer setting. ... [click here for more] |
Aether Studios |
$1.00
|
Raz' Noklash is amoung the most feared beings in existence. He hunts and eats when he is hungry, or when he senses something that could possibly one day be a threat to his existence. In every single recorded instance, only once have survivors been found. The price of the lives, a dragon egg. Raz is relentless, brutal, and efficient in his methods of working psionic magics and a grabbing tongue that... [click here for more] |
Aether Studios |
$3.00
|
The God of Hunger is among the most fearsome creatuers on Aach'yn. His feeding mouths can reach across miles, devouring entire caravans in minutes. There is little defense but run and look for higher ground. Mouth pincers routinely crush through barriers of arcane and physical with ease. Nothing restrains the old hungry one.
This model was sculpted by Aether Studios' Jacob Armour for our Kickstarters,... [click here for more] |
Aether Studios |
$3.00
|
The demongod of fear, Rub'aii, is one of the oldest and most active deities on the planetoid. He is seen very differently among the races. Among most of the civilized world he is not worshiped, but rather his defeat is celebrated. Surviving another month, and living as a good citizen is all one needs to revel in celebration of Rub’aii.
Rub’aii has not actually been seen since the 4th age, and... [click here for more] |
Aether Studios |
$2.00
|
Ququmatz it the Azite god of Unity. His tribe are the current rulers of the city state of Aztlan. Through their laws they enforce the unity of the scale. Humanoids of many races, including dwarves and elves are hunted with impunity and without remorse when captured. If not killed immediately, they will be sacrificed in ancient rituals by the Ququmatz royal family to strengthen their grip on control... [click here for more] |
Aether Studios |
$3.00
|
The Lord of the Hive is a massively sized custom insectoid god from our Aztlan Awakens Kickstarter. Moozet is the Lord of the Hive and worshiped by the Al-Aki race and others that dwell in the sandy wastelands of Aach’yn. Measuring 200mm deep, 175mm high, and 147mm wide he will is an imposing presence when dropped on a table. Moorzet was designed to specifications by Dave Dostaler and sculpted up... [click here for more] |
Aether Studios |
$3.00
|
Balanza Yuum is the original serpent that Tlaloc mated with to reseed the race of scales. Since that time thousands of years ago, he has grown to great size and enjoys virtual immortality through his union with the Goddess of life. He prefers to ignore the above world, but will surface and appear during ritual ceremonies by priestess of Tlaloc. This is a defensive weapon for the tribe, as Balanza Yuum... [click here for more] |
Aether Studios |
$3.00
|
Arg'aii is the Demonprince of Hopelessness. He trades for souls from the damned, but his wagers are rarely enticing. Rather they are usually the bargain of last recourse. Those with nothing left are all too eager to hope where none remains. ... [click here for more] |
Aether Studios |
FREE
|
Maako is the God of the Hunt and is one of the easiest to summon deities. Unfortunately he goes on a rampage for a fortnight after summoning. A very hungry fortnight. All parts clip together with Dragonbite clips. A link to download them is on the last page. ... [click here for more] |
Aether Studios |
$4.00
|
The Goddess of Life, Plants, Rebirth, Procreation, and all living beings. Sculpted by Nasos Maloudis. ... [click here for more] |
Aether Studios |
$2.00
|
This free set of underwater terrain is one of our favorite new set series at Aether Studios. Our patrons voted for more and this is one of the many sets made during the April 2022 production run.
... [click here for more] |
Aether Studios |
FREE
|
This is the core floor terrain set for the Atlantis series. It contains 26 2×2 tiles, 10 2×4 tiles, and 20 4×4 tiles all themed with Coral features compliments of the Smithsonian Institute. Our patrons voted for more Atlantis and this set was revised and expanded during the April 2022 production run.
... [click here for more] |
Aether Studios |
$1.00
|
This is the core wall terrain set for the Atlantis series. It contains 35 .STL models themed to a underwater cavern. Additionally, their are “Magic” walls where one can pass through, a Seraphim remix and throne, and so much more. Our patrons voted for more Atlantis and this set was revised and expanded during the April 2022 production run. Check out our patreon where we publish our patron requests... [click here for more] |
Aether Studios |
$14.00
|
Atlantis Half Sized Sea Cave and Thermal Vents. Half sized versions are always requested by our patrons and tribefolk. We filled this one with many unique variations and focused on thermal vent features throughout the set. ... [click here for more] |
Aether Studios |
$4.00
|
This set of underwater terrain is one of our favorite new set series at Aether Studios. Our patrons voted for more and this is one of the many sets made during the April 2022 production run. Nasos and Will did two shipwrecks, this one was more Nasos work. All new assets, far bigger, and based on scatter terrain with dragonbite connectors for large parts. ... [click here for more] |
Aether Studios |
$4.00
|
This set of underwater terrain is one of our favorite new set series at Aether Studios. Our patrons voted for more and this is one of the many sets made during the April 2022 production run. Nasos and Will did two shipwrecks, this one was where Will spent more of his effort, though Nasos’ own work shines. Together – the remixing of the previous Atlantis Coral into these wrecks allows for seamless... [click here for more] |
Aether Studios |
$5.00
|
This contains 15 models of seabed scatter whipped up upon request by Will Walker and Nasos Maloudis. Nasos made many new corals for our latest development cycle and we folded these into this scatter set along with our existing models from the Smithsonian and Carl.
... [click here for more] |
Aether Studios |
$4.00
|
Sealab 2022 was a request from Liz from a long ways back. After we made the Moonbase set, someone asked for a remix to ocean. It took longer than we wanted to make, but we are glad to have done it right. Many thanks to Carl for the extra work needed to erode the hull, add sealife, and prepare the special grounds. Many thanks also to Colin for providing the support files in a such a helpful and reusable... [click here for more] |
Aether Studios |
$4.00
|
Atlantis Undersea Terrain is a series from Carl, Will, and Nasos. This series focuses entirely on underwater terrain from the plane of Deepmurk. This endless ocean without surface is the ancestral home of the Murkbluut fishfolk. They zealously guard their sacred homeland without remorse for interlopers.
This set features the first part of what is to be a much expanded set. Carl, Nasos, Will, and others... [click here for more] |
Aether Studios |
$5.00
|
It ain’t each on the streets, but some are tougher than others. Don’t get caught crossing the bad hombres of Conch Street. These three fabulous undersea houses are tucked into this new free set. This set is a love letter to the cartoons of youth. We wouldn’t be making terrain today without them.
... [click here for more] |
Aether Studios |
FREE
|
Atlantis Miniatures II was a collaborative project that began like the first, with requests from Emily Huffman. She requested a mounted soldier component to her merfolk army. Carl again took on the request, working up all 4 miniatures models included in this set. We also threw in two extra Atlantis terrain tiles that we worked on this month. We hope you enjoy this set and it inspires you to... [click here for more] |
Aether Studios |
$6.00
|
Atlantis Miniatures III was a collaborative project that began with a request from our weekly free sculpt friday event on discord. The others models flowed out of the original request to fill out the set. We hope you enjoy this set and it inspires you to new ideas. For more Atlantis terrain and miniatures models, please check out the Free Dive and Conch Street Blues sets.
... [click here for more] |
Aether Studios |
$6.00
|
The Wardens of the plane of water, the guardians of the Deep Murk. They are great and giant warriors devoted to the protection of the deep places.
... [click here for more] |
Aether Studios |
$5.00
|
Log In 
