| Title ▼ |
Publisher |
Price |
The Ziltek Omnibus was made upon request by Jim & Lee Kearney for their Aethertowne Build. After sharing pictures of their amazing setup, we simply could not say no. The Omnibus features multiple options for a steampunk mass transit vehicle.
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill: 25-35% recommended.
-Top/Bottom Layers: 8 (or... [click here for more] |
Aether Studios |
$2.00
|
The Ziltek -T- Sedan was made upon request by Jim & Lee Kearney for their Aethertowne Build. After sharing pictures of their amazing setup, we simply could not say no. The -T- Sedan features multiple options for a modern transport / taxi / hotrod / outlaw conveyance.
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill: 25-35% recommended.
-Top/Bottom... [click here for more] |
Aether Studios |
$1.00
|
This set has been updated with a new "tavern style" setup instead of the old Village Post System. We also added a ton of new models. It wont let us show all of them.
Sample Tycho City: Uptown building:
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm recommended, 0.1mm for smoother features.
Infill: 10% for all models recommended. Less infill is possible,... [click here for more] |
Aether Studios |
$15.00
|
Turtle Huts and Panache Point contains 18 3D-printable STL models for creating elevated, interlocking scaffolds and catwalks. These models are compatible with all DragonbiteTM clips for connecting together. Files are available in 3 tops, The Tycho Uptown, Space GERDLE, and Aether Grate.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill:... [click here for more] |
Aether Studios |
$6.00
|
This set, Tycho City Memories Nightclub, is an expansion of the Tycho City series merging elements from Uptown and Streets set. Nasos Maloudis did almost all the hard work on this one, with Will providing basing and remixing assistance.
The exterior blends perfectly with Tycho City Streets set and features new scatter models. The Building and Interior perfectly suited to match an Uptown district city... [click here for more] |
Aether Studios |
$8.00
|
This set of terrain, Tycho City: Food Truck, is the brainchild of Aether Studios Jeromy K. Smith. This is intended to be the first teaser for his widely anticipated Tycho City Yamatoa Tower project. We LOVE cyberpunk and future terrain at Aether Studios. Tycho City was one of the first collaborations of Aether Studios, and we are so very proud that Jeromy is taking up the mantle. This latest model... [click here for more] |
Aether Studios |
$3.00
|
This set, Tycho City Clip-In Neon Signs, was made by Colin Christenson for our patrons and fans, mostly back in 2017-2018. These signs clip into any dragonbite clip spot for turning them into futuristic buildings. We've added many popular suggestions and we look forward to adding more to this set for our patrons and fans.
We hope you enjoy this free set. We have love having a place on your gaming... [click here for more] |
Aether Studios |
FREE
|
These risers use Fat Dragon Games DragonbiteTM clip-together bases, and support the bottom of an upper layer of Dragonbite tiles. They come in a variety of heights to allow you to position the upper level exactly where you want. The logic behind the various heights is:
Elevated/Dais 27.7mm: If you put a floor on top of this, the surface of the floor will be roughly level with the... [click here for more] |
Aether Studios |
FREE
|
Do you paint your 3D-printed terrain? If so, do you ever get paint on your hands from picking up a tile that's not quite dry? Or smudge one place while twisting the piece at an odd angle to get your brush at another place?
Never again. This comfortable grip snaps to the bottom of DragonbiteTM-compatible tiles, letting you paint the entire thing, odd angles and all, no muss no fuss. And if... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set of 3d printable gaming terrain you will find 1 model in 4 variations - The Great Clockodile - by Aether Studios very talented Nasos Maloudis. Put your town on notice with this oversized crocodile turned timepiece. In addition to a scatter model, you will find the Clockodile on 3 Aether Studios 4x4 Terrain tiles - Asteroid, Uneven Ground, and Old Floe/Anthill. Additional terrain... [click here for more] |
Aether Studios |
$2.00
|
From Aether Studios comes the Swamp of Sorrows 3d printable terrain and miniature sets. This set includes the colossal Black Dragon miniature from our first Kickstarter. This model prints in two pieces. It does not include the terrain models, which you can find in the Scatter Reeds and Rogue Brackmurk sets below. All miniatures print without supports. Additional information and resources can be found... [click here for more] |
Aether Studios |
$7.00
|
Included in this set of 3d printable terrain you will find 6 .stl models, 3 unique trees available in scatter and on Dragonbite compatible bases.
Recommended Print Settings:
Layer Size: 0.1mm recommended
Infill: 10% recommended for all models
Top/Bottom Layers: 9 (or 0.9mm if using a different layer size than 0.1mm)
Side Shell Count:... [click here for more] |
Aether Studios |
$4.00
|
We all have our favorite inspiration for our games. Sometimes, we picture it in our minds. Sometimes, Google provides a picture for us:
Then, the only thing left is to model that in 3D.
This set of 32 3D-printable STL files is our attempt to capture that look for underground sci-fi tunnels and bunkers. It includes a variety of walls, doors, corridors, and control panels. We hope you enjoy... [click here for more] |
Aether Studios |
$15.00
|
The first freebie from our Sky Islands kickstarter! The Corsair is one of the Skyships included in the campaign. This models prints without support in only a few parts.
We'd love to show you pictures, in detail, of the models in this set. But unfortunately Drivethrurpg's image management & database operations are run by underpaid complainers with a truly soviet work ethic. Alternatively,... [click here for more] |
Aether Studios |
Pay What You Want
|
This is the fourth freebie from our Sky Islands campaign. John-Paul is a Skysword of Aethertowne. The trusted Skyswords of Aethertowne serve and judge, jury, and if needed: executioner against those who would threaten the peaceful ways of the denizens of the cloud city. Skyswords are beloved by the people of Aethertowne as paladins without prayers, but no less devoted to the cause... [click here for more] |
Aether Studios |
Pay What You Want
|
One of the stretch goals from our Sky Islands Kickstarter. Greebles Diner is a well known moving fixture of the Aethertowne environs. Try his world famous Belairian Noodles for the most savory pasta you’ll find above the clouds.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended. Infill: 10% for all models recommended Top/Bottom Layers: 9 (or 0.9mm if using a... [click here for more] |
Aether Studios |
$2.00
|
The second freebie from our Sky Islands kickstarter! The free floating rocks are some of our favorite terrain from the campaign. These models print without support and clip together using dragonbite clips.
We'd love to show you pictures, in detail, of the models in this set. But unfortunately Drivethrurpg's image management & database operations are run by underpaid complainers with a truly soviet... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set of terrain you will find a large 6×6 Sky Islands House. Akara built this for her friends who often need a place to layover or a place to put up their feet and sit for a spell. It prints without supports and features tons of internal playing area. Dragonbite connections all for expansion into a massive cloud docks setting. We hope you enjoy this set, it was made by Colin Christenson... [click here for more] |
Aether Studios |
Pay What You Want
|
The third freebie from our Sky Islands kickstarter! Akara is one of the heroes of the Sky Islands. She is a friendly NPC who takes broken wreck and turns them into useful habitats. She is unparalleled in her ability to salvage functional treasure from literal trash. In addition to her talents as an engineer, she is a fantastic pilot as well with the ability to figure out a new vessel with breathtaking... [click here for more] |
Aether Studios |
Pay What You Want
|
Airguana are among the most fascinating creatures that have adapted to thrive on the Sky Islands. They can jump incredible distances with ease and grace. While normally docile herbivores, more than a few Airguana have been known to bond with their riders and zealously defend them. These beloved mounts will play dead, feign disinterest, and even pretend to run away only to turn on a dime and strike... [click here for more] |
Aether Studios |
Pay What You Want
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes a variety of decorative... [click here for more] |
Aether Studios |
$10.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes numerous statues that... [click here for more] |
Aether Studios |
$8.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes most of the rest of the... [click here for more] |
Aether Studios |
$10.00
|
This newest release of Seraphim includes a few miniatures we really wanted to get out. Pope Qarl and his Elemental Gargoyle Band are the warriors of Juvé, Goddess of Regrowth. We used these Gargoyles in the Seraphim Shortwall set and wanted to fill the request for miniatures, we hope you enjoy these supportless printing miniatures. We've updated this set with new miniatures from Nasos Maloudis. ... [click here for more] |
Aether Studios |
$5.00
|
Included in this set of 3d printable gaming terrain you will find 25 models of 2x2 Dragonbite Compatible terrain with plant and natural growth panels. Y 11 Wall tiles, with and without sconces. 10 Corners with and without sconces. 3 door frames and 1 door model. This is our 13th released set in the Seraphim series. 25% of the sale of terrain in this set goes to Stand Down Gaming which does wonderful... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable Dragonbite compatible terrain is the 14th set of our Seraphim series. It includes 12 walls (2x2 and 2x4) with Zodiac signs for adding the astrological gods to your temples. Many thanks to Shannon Hoffman for helping get this set ready for publishing.
Drive thur limits the number of pictures we can upload. To see pictures of this set please visit us on Minihoarder.
Recommended... [click here for more] |
Aether Studios |
$6.00
|
Included in this set of 3d printable gaming terrain you will find 13 models built in our 2x2 Seraphim tileset. These walls are built with animal spirit emblems featuring natural scenes. We hope you enjoy this 12th set in the Seraphim series, 25% of the sale of terrain in this set goes to Stand Down Gaming which does wonderful work helping care for veterans. A very special thank you to my friend and... [click here for more] |
Aether Studios |
$6.00
|
The Seraphim line of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
This expansion set includes water tiles with decorative... [click here for more] |
Aether Studios |
$10.00
|
Included in this set of 3d printable terrain you will find a classic trap to add to your Seraphim Dungeons. The Doomball of Doom will let you crush those who dare enter House of Heroticus without his permission.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother features
Infill: 10% recommended
Top/Bottom Layers: 6 (or 0.9mm... [click here for more] |
Aether Studios |
$3.00
|
This set of 3D-printable Angelic terrain will be featured in our World of Aach’yn module series as the home of Heroticus. Heroticus is the most active deity on Aach’yn and his domain is literally “kicking ass” as in he or his angels will show up when there is a good fight about to happen, or if a good fight needs to be happening.
DriveThur limits the number of pictures we can post. If you... [click here for more] |
Aether Studios |
$7.00
|
This set of thirty 3D-printable STLs will give you a variety of rolling terrain for your outdoor landscapes. It includes low and high pieces as well as a variety of countoured edges to make small hills, valleys, and mounds. There are both plain pieces and pieces with a large selection of rocks, as shown below.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm for smoother... [click here for more] |
Aether Studios |
$8.00
|
This set of 3D-printable terrain expands on the original Pharaoh sets with new STL models. It includes a new "seraphim" theme for floors, walls, and corners, as well as butterfly-engraved slot walls that fit both these bases and the earlier Pharoah bases. The tiles are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.1mm
Infill:... [click here for more] |
Aether Studios |
$10.00
|
This set of 3D-printable terrain expands on the original Pharaoh 1 and Pharaoh 2 sets with new STL models in the same Egyptian theme. It includes multiple statues to flesh out an Egyptian throne room, as well as a selection of additional large floors and pillars. The bases are compatible with all DragonbiteTM terrain.
Recommended Print Settings:
Layer Size: 0.15mm, or 0.10mm... [click here for more] |
Aether Studios |
$12.00
|
This set of 3D-printable terrain expands on the original Pharaoh 1 set with new STL models in the same Egyptian theme. It includes additional floors, walls, corners, pillars, and scaled models to create an entire Map Room. The bases are compatible with all DragonbiteTM terrain. Drivethur limits the number of pictures that can be shown, if you like to see pictures please visit us on myminihoarder. ... [click here for more] |
Aether Studios |
$16.00
|
The Ziltek Arbiter Monotread is a contribution to the Sky Islands 2 Campaign from Colin Christenson. Colin is the originator of the Sky Islands series, so we wanted to make sure the first release for the Sky Islands 2 Kickstarter was one of his. We hope you enjoy this bonus campaign reward, it was made entirely post-campaign as a labor of love for our backers.
MINIATURE RECOMMENDED PRINT SETTINGS ... [click here for more] |
Aether Studios |
$2.00
|
The Zerlocke Mk. I Steam Horse is THE utility travel vehicle of the Sky Islands’ Everyman. We’re not sure what that means, but it is the slogan of they use to advertise this paragon of utilitarianism. It’s good, it’s cheap, and a masterwork of reliability. Zerlocke – Don’t get left behind!
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill:... [click here for more] |
Aether Studios |
$2.00
|
The Thrasos Class Steam Tank is one of the principle weapons of war used by the Pankhurst Army vs the Goblin Mugdal Horde. This model features both Resin and FDM versions. and is sized to fit a large number of printers.
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill: 25-35% recommended.
-Top/Bottom Layers: 8 (or 0.8mm if using a different layer... [click here for more] |
Aether Studios |
$4.00
|
The Nightwing Racer was one of the Stretch Goals of the Sky Islands 2 Campaign. Inside you will find ample space for a 25mm base miniature to ride around the streets of Pankhurst, Aethertowne, or any of the hamlets between on the massive Sky Island of Belaria.
MINIATURE RECOMMENDED PRINT SETTINGS
-Layer Size: 0.1mm recommended, 0.05mm for resin.
-Infill: 25-35% recommended.
-Top/Bottom Layers:... [click here for more] |
Aether Studios |
$3.00
|
The Pankhurst Miniatures were sculpted by Jason Surlock as one of the first sets for Sky Island II Kickstarter. Jason loves to create miniatures with personality and character . So much effort helps a lot when weaving the character into burgeoning World of Aach'yn.
MINIATURE RECOMMENDED PRINT SETTINGS
Layer Size: 0.1mm recommended, 0.05mm for resin. Infill: 25-35% recommended.... [click here for more] |
Aether Studios |
$8.00
|
Included in this set you will find 2 utility holders for paint water and paints. 35mm and 70mm sized internal diameter paint holders by Colin Christenson. Thank you to all the fans and patrons of Aether Studios for your years of support. We love making things for you! This set is one of our free utilities, including the Dragonbite Tile Risers and Tile Painting Holder.... [click here for more] |
Aether Studios |
Pay What You Want
|
This set is one of our most rediculous, and purposefully so. We have no explanations, it was just an idea one day. We have no apologies either. We really do love how it is turning out though. This first expansion features the epic fortress of the Rampumpkins and the resident Knight, Ser Gourdo Jack. Long have the knights of Rampumpkin rallied to the Order of the Soilborn. So shall it be until the... [click here for more] |
Aether Studios |
$5.00
|
From Aether Studios comes our least series series: Order of the Soilborn. This is a passion project from the Aether’s Director and he routinely begs, cajoles, and bribes the artists to make models for this ridiculous project. We have much more planned, but like any crop it takes a while to harvest. This is an ongoing project.
TERRAIN RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm... [click here for more] |
Aether Studios |
$5.00
|
The Mugdal War Turtle is one of the great beasts of War used by the Goblin Horde. The War Turtle is often used as a mount by officers, but also as a weapon of mass destruction. The Bomb version contains enough explosives to blow open almost any wall. Even the most explosive-addicted members of the Horde give these wallbusters a wide berth on the field of battle.
The characters in this set are all... [click here for more] |
Aether Studios |
$3.00
|
The Mugdal War Train was a creation of Nasos Maloudis. After all the education provided during the construction of the Dwarven Electro-Rail, Nasos and Jason went simple and efficient with these new train designs. Fully supportless, large single prints. Simple interlocks and wide open play spaces make this train set a fully different beast than our Electro-Rail series.
TERRAIN RECOMMENDED PRINT... [click here for more] |
Aether Studios |
$6.00
|
The Mugdal Siegebreaker Behemoth is one of the great beasts of war created by the Mugdal Tribe. This gigantic dinosaur comes in two versions. A howdah topped Mounted version, and a dedicated tank.
The characters in this set are all residents, soldiers, or war beasts of burden in the Great War between the Clouds. This bloodsoaked campaign is currently being waged above and below the Sky Island... [click here for more] |
Aether Studios |
$3.00
|
The Mugdal Miniatures were sculpted by Nasos Maloudis and Jason Surlock as one of the first sets for Sky Island II Kickstarter. Nasos and Jason loves to create miniatures with personality and character. So much effort helps a lot when weaving the characters into the burgeoning World of Aach’yn.
MINIATURE RECOMMENDED PRINT SETTINGS
–Layer Size: 0.1mm recommended, 0.05mm for resin.
–Infill: 25-35%... [click here for more] |
Aether Studios |
$15.00
|
The Mugdal Megachopper T-Rex was one of the most hotly desired models of the Kickstarter. We wanted to get it out to you with the 1st release. Inside you will find options for FDM and Resin printing for this epic beast of war!
RECOMMENDED PRINT SETTINGS
Layer Size: 0.15mm minimum. 0.1mm recommended.
Infill: 10% for all models recommended
Top/Bottom Layers: 9 (or 0.9mm if using a different layer... [click here for more] |
Aether Studios |
$5.00
|
The Mugdal Goblin Rocketeer was one of the free sets we offered during the Sky Islands 2 Kickstarter. Post-campaign we did some additional work to make these models print supportlessly on FDM printers.
The characters in this set are all residents, soldiers, or war beasts of burden in the Great War between the Clouds. This bloodsoaked campaign is currently being waged above and below the Sky Island... [click here for more] |
Aether Studios |
Pay What You Want
|
Included in this set from Károly "Carl" Csúrgó, Nasos Maloudis and Will Walker you will find over 100 models of hellish Lava terrain. Thank you for your support of Aether Studios, this Kickstarter provided funds for a brand new computer for Carl and a great deal of additional support for the families of our artists. It is an honor to have a place on your gaming table.
This set of lava terrain... [click here for more] |
Aether Studios |
$20.00
|
40+ Miniatures, for resin printing, for use in hellish encounters. All the miniatures from our 7th Kickstarter: Roqom – Lava Dungeon Hellplane. All miniatures are designed for resin printing. Also all the miniatures are pre-supported using Lychee, with a save file and unsupported files included. Please, think of the mice powering the image servers before you download any of the pictures on this... [click here for more] |
Aether Studios |
$21.00
|
Log In 
