| Title |
Publisher |
Price |
This set has a 2x4 path, 2x4 ground and 2 2x2 ground tiles for use wth Fat Dragon Games Shadow Grove Set
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommened Settings:
Layer Height: 0.2mm or less
Infill: 10%, 5% minimum
Top/Bottom Layers: 8... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included are three 2x2 dungeon floor tiles:
2x2 with center dungeon stone wall
2x2 with center dungeon stone wall and edge stone wall (T intersection)
2x2 with center dungeon stone rectangle door base
In order to use the door, you will need to own a rectangle Door, Door Hinge, Door Lintel, and Door Plug which can be found in a number of Fat Dragon Games sets here on DTRPG.
DRAGONLOCK Ultimate:... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This a 2' and 4' Tilt bins with finger holes fir the Ultimate: GM Screen of DOOM
Found here https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this free bonus to the Tycho City mega set is a battery powered tealight capable Airbender statue. Originally crafted by prolific thingiverse artist OrangeWine, this statue has been carved out to allow a tealight to shine through in multiple areas.
Airbender Display by tychocity on Sketchfab
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this title are stl models for 6x6 and 8x8 Dungeon and Cavern (revised) floors. For use with Fat Dragon Games Dragonlock terrain systems. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Blacksmith Forge with LED
This is a remix of the forge from the "DRAGONLOCK Ultimate: Blacksmith Shop" and the "DRAGONLOCK Ultimate: LED Dungeon Wall (2x2 tile)".
There are three parts in the file, the Forge, the LED Tray, and the Flame.
NOTE: you have to supply your own battery and LED. See the "DRAGONLOCK Ultimate: LED Dungeon Wall (2x2 tile)" for information on suggested batteries, LEDs,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
It's about giant buildings folks. That's what it really comes down to. That's all that's left when we go to see our ancestors. The Busy Little Dwarves Design Bureau understands the need to work hard today to ensure a better tomorrow for our little ones. After all, what do we really leave behind for our children but unnecessarily tall structures with incredible, intricate, and impractical architecture.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included is a 2x2 castle floor tile with the secret door wall base from DRAGONLOCK Ultimate: Dungeon Expansion Set 1.
In order to use this product, you will need to own one of the Wall_Secret_Top files from DRAGONLOCK Ultimate: Dungeon Expansion Set 1, which can be found here:
https://www.drivethrurpg.com/product/170650/DRAGONLOCK-Ultimate-Dungeon-Expansion-Set-1
DRAGONLOCK... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Your king not satisfied having castle walls the same height as all the other kings? No problem. This tall wall is roughly 77.7mm high. Make your castle stand tall!
EDIT: Added a matching corner wall. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This massive 98 item set contains the basics to build a diverse catacombs dungeon. Included in this set are:
16 Wall Tiles (including transitions from normal FDG dungeons)
20 Floor Tiles (including transition tiles)
10 Doors (also includes 9 custom text lintels)
8 Corners (4 with Skulls along the wall base, 4 without)
8 Curved Walls (4 with Skulls along the wall base, 4 without)
8 Pillar Tiles (4... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set includes some the earliest work from the Fat Dragon Community Crafters. This 44 item set contains everything you need to build Dragonlock Ships with masts, rails, and cannon decks.
Originally crafted by Squirrelhammer and later updated by Arenwel, this set represents the very best spirit of the FDG crafting community: Working together, inspiring each other, and sharing the benefits with... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set of pyramid tiles was a collaboration between myself and user @arenwel on the Fat Dragon Games forums. He is a true friend and I thank him so much for helping me get where I am now.
There are two different tilesets included in this 26 item title:
1) External, which sits flush to the table and each exterior tile for aesthetics. Connects to Fat Dragon titles on 3 sides.
2) Internal, which... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
I needed a way to add variety to my cavern waterways. Included are two diagonal cut water tiles, one a bit more narrow than the other. Enjoy! ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Looked in Gaoler Lous, and in Forum Prisons and couldnt find this, so I made it because I needed it, shared it in case someone else needed it. Does not include the doors, just the floors.
Doors and other walls can be found here:
https://www.drivethrurpg.com/product/242012/Best-of-the-Forums-Prison-Cells?term=forum+prison&test_epoch=0 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
If you have Fat Dragon Games Village sets and you need to make REALLY BIG room areas then these are the solution for you!
These double pillars allow you to use D-Walls to run walls along two 4"x4" using adjacent pillar holes (just as C-Walls do). The pillars have double prongs that are inserted into corresponding corners of adjoining tiles as shown in the image.
The Stone pillar projects assymetrically... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Dragonbite Clip Removal Tool!
Tired of damaging your clips and fingers? Try this Dragonbite clip removal tool!
Prints in about 15 minutes when printed with FDG terrain profile on Ender-3.
New addition! Version 3 has a wider handle with a textured grip. A slip on handle can also be printed for extreme clip removal!
These are the clips used:
https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is just something I made while learning sculpting tools, I plan to release more random things I make as i make and refine them, you guys can just have fun with them. update: added "Alien Saucer" this only contains a single STL currently released The haunted painting can be printed but must be on the high detail settings and have your printer dialed in: note the fingers, horns and teeth tend... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Andrew Callaghan requested a wood floor version of the FDG Dragonshire Building 2 Bumpout. Here they are for bumpout A, B and C. Requires Fat Dragon Games Dragonshire Building set.
Added the bumpout door frame
Dragonshire Builing Set 1:
https://www.drivethrurpg.com/product/324779/DRAGONLOCK-Dragonshire-Building-Set-1?affiliate_rem=553084
Dragonshire Building... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This floor piece can be used with the FDG0166R_Floor_Trap_Door and FDG0166R_Floor_Trap_Door_Frame (from DRAGONLOCK Ultimate: Dungeon Expansion Set 3 - linked below) to create a trap door using the Dragonshire stone floors.
In order to use this product, you will need DRAGONLOCK Ultimate: Dungeon Expansion Set 3, which can be found here:
https://www.drivethrurpg.com/product/178364/DRAGONLOCK-Ultimate-Dungeon-Expansion-Set-3... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set of 5 remixed tiles from Fat Dragon Games Dungeons and Market set are everything you need to add curtain doorways to your games!
Please see the included ReadMe for print instructions.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Dungeon floor with a post in the middle. FDG Dungeon Starter and Expansion 7 have other versions of this tile. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is one of the first remixes I made. It is in the style of FatDragonGames Rea;m of the Mountain King style. Never planned to release it, but someone asked for it. It is set for Pay What you want because I could not set it to FREE.
Dragonbite Clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20
Recommended Print Settings:
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
FDG custom profile for printing Fat Dragon Games miniatures on the Bambu Lab A1 Mini and full-size A1 3D printers. This profile requires a .2mm nozzle, and we recommend watching the YouTube video linked below. Sunlu PLA Meta is our recommended filament.
BEFORE USING READ THE INCLUDED INSTRUCTION PDF.
Be sure to turn on e-mail notifications from FDG in your DrivethruRPG user account so you will get... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
UPDATED FOR CURA 5.6x!
FDG custom Cura profile for Creality 3D printers (Ender-2 Pro, Ender 3, Ender 3 Pro, Ender 3 v2, Ender-3 V2 Neo, Ender 5, CR-10).
FOR CREALITY SPRITE DIRECT DRIVE EXTRUDERS CHANGE RETRACTION DISTANCE TO 1mm!
Be sure to turn on e-mail notifications from FDG in your DrivethruRPG user account so you will get an e-mail notification anytime we update these files.... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
These racks will hold your FDG minis for transportation, and stack to take up less shelf space. Non-locking versions are also included. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This Barn set contains models by several of us who were active on the FDG forums for many months, in particular Arenwel, Colin, Aaron, and I. It was a wonderful time of learning for us and Arenwel was a wonderful instructor. He and Colin were the primary artists on this set, and we hope you all of the hard work and effort that went into this set.
Other sets often used for Barn Construction:
FDG Village... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Welcome to the Gaping Portal Tavern, the most famous Tavern in Waterdrop City, where you can have an Ale and muster up your courage to get lowered down into the well (to have a drink of water maybe?).
This piece needs to be printed four times to get a 10"x10" Tavern floor section with an 8" wide well hole in the middle. The walls are 22mm high off the base giving an impression of being just above... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Here's a micro Ghost, just in time for Halloween! Scaled to be used with the Micro Dungeons set. Should print without supports.
Print using FDG Cura mini settings, or equivalent.
Also includes a scaled up 32 mm version... if for some reason you wanted to print him that big.
Remember to use your clips on their sides for the Micro Dungeons, the side of the tile should look like it has a duck mouth... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Fat Dragon Games' 3D printable mini painting holders are great — but they don't grip hex-base minis, or the circular Heroforge bases, as well as they could. This set of alternate slider models is compatible with the standard FDG mini painting handles, but gives a bit of extra grip.
Slider-grips for 1", 1.5", and 2" minis are included. This product requires the handle and base models from Fat Dragon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Curved wall with castle floor. Done at Julie Hanson's request. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A elevated to lower waterfall transition requested by Jeff Kazules. May be more added to this in the future. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Make your combats more epic!
Rising and falling battlefields are the herald of great movie battle scenes. But when you've got a flat base on a miniature, they tend to fall flat (or down the stairs).
The included adapter allows large-based miniatures to hold their ground on the stair cases present in the majority of Fat Dragon Games' amazing sets. Included pictures showcase the Dungeon... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 160 x 40 mm round Dice tray for the GM Screen of DOOM you will need to down load the dragonbite clips here https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30 ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 100 X 88 X 35 mm Dice Tray for DRAGONLOCK Ultimate: GM Screen of DOOM with the inside made smoot by request for Bill Buchalter.
Download the free DRAGONBITE™ Clip model here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346/product/206435/DRAGONLOUltimateDragonbiteTM-Clip-v20
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a 100 X 88 X 35 mm Tray for the DRAGONLOCK Ultimate: GM Screen of DOOM link is https://www.drivethrurpg.com/product/251695/DRAGONLOCK-Ultimate-GM-Screen-of-DOOM?src=hottest_filtered
Download the free DRAGONBITE™ Clip model here: https://www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v30?manufacturers_id=346/product/206435/DRAGONLOUltimateDragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set includes 2 Dragonbite tiles with tree stumps featuring either an axe or a two-man crosscut saw, 2 freestanding tree stumps with axe and saw and a pile of 2x2" pile of logs. The pieces were made using Fat Dragon Games models and items off of Thingiverse. Check the Read me file for more information.
For suggested print settings, check out the FDG Free Starter Set: https://www.drivethrurpg.com/product/197128/DRAGONLOCK-Ultimate-Free-Sample-Set... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a small remix of Tom's Miniature Painting Holder. I made a 1 piece new handle & a screw top for the two piece. A taller old style that takes a Dragonbite Clip, a tall old style with a 5mm X 3 mm hole for a magnet to use with the 1 and 5 mini holder tops I made or you can just glue the top of your choice. I also made the pins on the new necks a little smaller for a better fit and I shaved... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This pack contains pieces I have made to fill out and add variations to the different village sets.
Currently Includes:
Wall B Door
Wall B Windows for Timberframe, Fieldstone, Wooden, and Timber & Stone sets
Wall D Door + Window for Timberframe, Fieldstone, Wooden, and Timber & Stone sets
Wall D Centered... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is a custom mashup of the Dragonlock Dungeon narrow hallway, and the Castle interior stairs to create a staircase that fits neatly among other tiles. It's particularly useful for basement stairs.
The original source models are available in the following sets:
https://www.drivethrurpg.com/product/277443/DRAGONLOCK-Ultimate-Castle-Starter-Set
https://www.drivethrurpg.com/product/170650/DRAGONLOCK-Dungeon-Expansion-Set-1... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Realm of the Mountain King wall with geared lever and gem like found in DDO to open doors or activate effects. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This set currently includes 3 tiles to go with the Fat Dragon Games Shadow Grove paths and river sets. I widened the path and raised the edge to connect to the bridge ends better. There is 1 straight path, 1 T path and 1 3 way path. Does not include bridge ends, it was used to show how they fit with ithe bridge ends.
Dragonbite clips can be found here:
www.drivethrurpg.com/product/206435/DRAGONLOCK-Ultimate-DragonbiteTM-Clip-v20... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Rural Roads
A collection of 3D tiles depicting rural roads suitable for your modern, post-apocalyptic, and sci-fi for RPG and tabletop games. Tiles are designed to be printed on FDM printers with 0.4mm nozzle using the Fat Dragon Games dungeon terrain Ender 3 profile. Road sections come with variants to accommodate traffic signs and stop lights.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This is my rendition of Roc-E from Children of the Fallen Sun, print pieces separately then glue them together with Gorrilla glue. also included is a "charging station". I have permission from Stephen Newton to produce this as long as it is available to anyone. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Sci-Fi bases for your miniatures. Includes full size bases as well as inserts to use in regular plastic bases.
... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Secret rotating starship door. Print at .1-.2 with 0-10% infill ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this free set are 6 models for secret rotating doors. The original rotating cavern door was included in the Centurion set, but with the release of the revised Cavern set from Fat Dragon Games, it seemed fitting to release a new version and update to the legacy. This rotating door rotates on the side rather than the middle.The Tavern tile rotates from the middle.
It is recommend to use... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
A "separate wall" style archway for Dragonbite. Remixed from the archway in DRAGONLOCK™ ULTIMATE: DUNGEON EXPANSION SET 3 FDG0166.
This product was created under license. Dragonbite Community Creator, Dragonlock, and Dragonbite are trademarks of Fat Dragon Games in the U.S.A. and other countries.
This work contains material that is copyright Fat Dragon Games and/or other authors. Such material... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
I needed a long rectangular chimney for my project. The regular square versions just weren’t cutting it. Thus “skinny chimney” was born. The chimney is not hollow. The hole in the top just goes down a short way for artistic look. ... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
Included in this set are 34 STL files corresponding to the status effects of the 5th Edition Dungeons and Dragons game.
Advantage, Charmed, Disadvantage, Deafened, Fatigued, Frightened, Grappled, Incapacitated, Invisible, Paralyzed, Petrified, Poisoned, Prone, Restrained, Stunned, Unconscious, Exhuasted Dying, Stabilized, Save, Fail, Misfire, and Concentrating are included. Flying 5, 10, 15, 20,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
This includes a large steam boiler, plus a shovel and sacks of coal. The boiler is sized so it can just barely fit inside of a house (though a larger structure or outside would make more sense). The sacks of coal could also be used for other produce, such as rice or other grains.
I'd recomend 15-20% infill for the boiler.
DRAGONBITE™ Community Creator model.
For suggested print settings,... [click here for more] |
Fat Dragon Games |
Pay What You Want
|
![20 for 20 IV 5E MEGA-BUNDLE [BUNDLE]](https://d1vzi28wh99zvq.cloudfront.net/banners/b_3730_20200401020431.jpg)
Log In 
