Close
Close
Advanced Search

A Whole Bunch of Wet Caverns (Flat Water) [BUNDLE]Click to magnify

A Whole Bunch of Wet Caverns (Flat Water) [BUNDLE]

ADD TO WISHLIST >
This special bundle product contains the following titles.


Crossing the Chasm
Regular price: $5.99
Bundle price:
 $4.49
Format:
 STL (3D Model)
The initial 3D-printable Chasm release brought much more appealing models to add a lower level of caverns to your maps.  Several supporting sets have included various types of bridges over the chasm, from wooden to stone. But, what about a more natural crossing?  This set includes several chasm and cavern pieces with stepping stone columns to traverse the chasm. (Don’t worry, the stirges won’t attack until you’re on the middle step.) As before, the Chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles.  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level. Note that three of the pieces have watery bottoms.  They are intended for use with the Wet Chasms set. Typi...

Wet Caverns 2
Regular price: $14.99
Bundle price:
 $11.24
Format:
 STL (3D Model)
This set of 3D-printable terrain expands on the Fat Dragon Games line of cavern tiles with water alongside walls and corners -- based on the latest style of FDG cavern walls, floors, and water.  It includes a waterfall to support maps with water on multiple levels, such as the Cragmaw Hideout from the introductory 5e Lost Mine of Phandelver adventure. (If you want the same models with wavy water effect, see the Wet Caverns 2: Wavy Walls set.) Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets:...

Wet Caverns 2: Elevation
Regular price: $10.99
Bundle price:
 $8.24
Format:
 STL (3D Model)
Wet caverns are fun, but what natural cavern features an entirely flat, single-level layout?  This selection of 3D-printable STL models adds a mid-level elevated surface alongside your underground rivers and lakes.  Combine with the starter Wet Caverns 2 set and the elevated pieces in FDG Cavern Expansion 1 to create ever-more-elaborate wet caverns with elevated sections!  (The sample layout on the cover also uses pieces from Cavern Expansion 1.) (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Elevation) Models in this set include: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side ...

Wet Caverns 2: Low Corridors
Regular price: $9.99
Bundle price:
 $7.49
Format:
 STL (3D Model)
This set of 3D-printable terrain adds on to sets like Wet Caverns 2 and Wet Caverns 2: Low Walls so you can join up multiple wet caverns, using wet corridors in between!  Compared to full-height cavern pieces, these lower wet corridors are: Faster to print Easier to see over Easier to place miniatures close to -- especially important for tight corridors! These corridors work well with both half-height and full-height caverns; the convenience of using low walls for narrow corridors can't be overstated. Sample corridor complex: Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm i...

Wet Caverns 2: Low Streams
Regular price: $10.99
Bundle price:
 $8.24
Format:
 STL (3D Model)
This set of 3D-printable STL terrain expands on Wet Caverns 2: Low Walls so you can build narrow streams through your half-height caverns.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, transitions from streams to thicker rivers or lakes, and transitions from streams near walls to streams across flat ground.  (The add-on Wet Caverns 2: Low Corridors lets your streams flow on through corridors as well!) Why low cavern walls?  These lower stream walls are: Faster to print Easier to see over Easier to place miniatures close to Sample Layout (in addition to this set, includes pieces from Low Walls, Low Corridors, and FDG Cavern Expansion 3...

Wet Caverns 2: Low Walls
Regular price: $11.99
Bundle price:
 $8.99
Format:
 STL (3D Model)
This set of 3D-printable STL terrain brings water to your half-height caverns!  Now you can create underground rivers, pools, and lakes up close to lower walls and entrances.  Mix with pieces from other sets such as FDG Cavern Expansion 1, Low Corridors, and Low Streams to add even more variety to your half-height cavern water layouts! Why half-height walls?  These lower walls are: Faster to print Easier to see over Easier to place miniatures close to Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Rela...

Wet Caverns 2: Stream Elevation
Regular price: $8.99
Bundle price:
 $6.74
Format:
 STL (3D Model)
This set of 3D-printable STL terrain builds on the starter Wet Caverns 2 set and expansion Wet Cavern 2: Streams to add a higher level near your narrow streams.  Inspired by the entrance to the Cragmaw Hideout (a multi-level map with steps alongside streams), this set includes steps, platforms, and elevated terrain near streams. (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Stream Elevation) Models included in this set: Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different layer size than 0.15mm) Side Shell Count: 2 (or 0.8mm if using a different nozzle size than 0.4mm) Raft/Brim/Supports: none Related Sets: Wet...

Wet Caverns 2: Streams
Regular price: $14.99
Bundle price:
 $11.24
Format:
 STL (3D Model)
This set of 3D-printable STL models builds on the starter Wet Caverns 2 set to add support for narrow streams.  Inspired by the entrance to the Cragmaw Hideout (shown on the adventure map as a 10’ wide cave corridor, half dry ground and half water), the models in this set allow streams up close to walls, streams in the middle of flat ground, and transitions in between. (For the same models with a wavy water texture built into the models, see Wet Caverns 2: Wavy Streams) Sample Layout (along with this set, includes pieces from the FDG Cavern Starter Set, FDG Cavern Expansion 1, and Wet Caverns 2): Recommended Print Settings: Layer Size: 0.15mm, or 0.1mm for finer detail Infill: 10% for all models recommended, 5% minimum Top/Bottom Layers: 6 (or 0.9mm if using a different laye...

Wet Chasm
Regular price: $10.99
Bundle price:
 $8.26
Format:
 STL (3D Model)
Chasms are great, but how about spicing up a cavern map with an underground river or lake?  This set of 3D-printable STL models combines the Chasm walls with water bases, to provide chasms with a watery bottom.  It includes an entrance and two varieties of water spray, along with multiple chasm walls and corners. As before, the chasm models in this set stick up far enough to make a smooth edge with an upper level of tiles (see the sample rendering on the cover image).  You can either rest the upper level on a lower level of tiles, or use the Dragonbite Tiles Risers to support the upper level.  All the pieces in this set should be clipped in place from the bottom. Important: This set includes smooth water sections, in the style of the current FDG Cavern Expansion 1 pieces.  See the ...


Total value:$99.91
Special bundle price:$74.93
Savings of:$24.98 (25%)

Terms & Conditions for products by Fat Dragon Games can be viewed HERE. 

pixel_trans.gif
 
 More from this Title's Contributors
pixel_trans.gif
 
 Customers Who Bought this Title also Purchased
pixel_trans.gif
pixel_trans.gif
Reviews (0)
Discussions (0)
Narrow Results
$ to $
 Follow Your Favorites!
NotificationsSign in to get custom notifications of new products!















Product Information
Community Content
Publisher Stock #
DP-WCFlat
Format
Original electronic Click for more information
Scanned image
These products were created by scanning an original printed edition. Most older books are in scanned image format because original digital layout files never existed or were no longer available from the publisher.

For PDF download editions, each page has been run through Optical Character Recognition (OCR) software to attempt to decipher the printed text. The result of this OCR process is placed invisibly behind the picture of each scanned page, to allow for text searching. However, any text in a given book set on a graphical background or in handwritten fonts would most likely not be picked up by the OCR software, and is therefore not searchable. Also, a few larger books may be resampled to fit into the system, and may not have this searchable text background.

For printed books, we have performed high-resolution scans of an original hardcopy of the book. We essentially digitally re-master the book. Unfortunately, the resulting quality of these books is not as high. It's the problem of making a copy of a copy. The text is fine for reading, but illustration work starts to run dark, pixellating and/or losing shades of grey. Moiré patterns may develop in photos. We mark clearly which print titles come from scanned image books so that you can make an informed purchase decision about the quality of what you will receive.
pixel_trans.gif
Original electronic format
These ebooks were created from the original electronic layout files, and therefore are fully text searchable. Also, their file size tends to be smaller than scanned image books. Most newer books are in the original electronic format. Both download and print editions of such books should be high quality.
This title was added to our catalog on November 25, 2019.